Table of Contents
Advertisement
CAUTION
Avoiding battery fires or explosions
■
Observe the following precautions to prevent accidentally igniting the flammable gas
that may be emitted from the battery:
Make sure each jumper cable is connected to the correct terminal and that it is not
●
unintentionally in contact with any other than the intended terminal.
Do not allow the other end of the jumper cable connected to the "+" terminal to come
●
into contact with any other parts or metal surfaces in the area, such as brackets or
unpainted metal.
Do not allow the + and - clamps of the jumper cables to come into contact with each
●
other.
Do not smoke, use matches, cigarette lighters or allow open flame near the battery.
●
Battery precautions
■
The battery contains poisonous and corrosive acidic electrolyte, while related parts
contain lead and lead compounds. Observe the following precautions when handling
the battery:
When working with the battery, always wear safety glasses and take care not to allow
●
any battery fluids (acid) to come into contact with skin, clothing or the vehicle body.
Do not lean over the battery.
●
In the event that battery fluid comes into contact with the skin or eyes, immediately
●
wash the affected area with water and seek medical attention.
Place a wet sponge or cloth over the affected area until medical attention can be
received.
Always wash your hands after handling the battery support, terminals, and other bat-
●
tery-related parts.
Do not allow children near the battery.
●
NOTICE
When handling jumper cables
■
When connecting the jumper cables, ensure that they do not become entangled in the
cooling fans or engine drive belt.
IS350/300/200t_U (OM53D18U)
8-2. Steps to take in an emergency
515
8
Advertisement
Table of Contents
Troubleshooting
