Distance (Driving Range/After Start); Boost Meter/Oil Temperature Gauge/Oil Pressure Gauge (F Sport Models For Is200T); Gear Positions - Lexus 2016 IS 200t Service Manual

88
2. Instrument cluster

Distance (driving range/after start)

■
Displays the estimated maximum distance that can be driven with the quantity
of fuel remaining and the distance driven after the engine was started respec-
tively.
• This distance is computed based on your average fuel consumption. As a result,
the actual distance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the tank, the display may not be
updated.
When refueling, turn the engine switch off. If the vehicle is refueled without turning
the engine switch off, the display may not be updated.
Eco Driving Indicator
■
P. 91
Boost Meter/Oil Temperature Gauge/Oil Pressure Gauge (F SPORT
■
models for IS200t)
Boost Meter:
Displays the boost pressure. The display changes colors when the set pres-
sure is exceeded.
Oil Temperature Gauge:
Displays the temperature of the engine oil. The display flashes when the
engine oil exceeds 284°F (140°C).
Oil Pressure Gauge:
Displays the oil pressure for the engine interior. A buzzer sounds and warning
message is displayed when the oil pressure gets low. (P. 486)
Depending on the road conditions, temperature, vehicle speed, etc., the actual
vehicle condition on the display screen may differ.
Use the display screen as a reference.
Tire inflation pressure
■
P. 435

Gear positions

■
P. 173
*
1
: Displayed when the item is set in "Drive Info 1" or "Drive Info 2". Use these values as a
reference.
*
2
: Resetting
The following displays can be reset: average fuel consumption after reset, average
vehicle speed after reset, and elapsed time after reset.
• To reset, display the desired item and press and hold
• If both displayed items are resettable, a reset selection screen will appear.
IS350/300/200t_U (OM53D18U)
1
*
.