Instrument Panel Light Control; Instrument Panel Brightness Adjustment; Outside Temperature Display; Pop-Up Display - Lexus 2016 IS 200t Service Manual

84
2. Instrument cluster

Instrument panel light control

The brightness of the instrument panel lights can be adjusted.
Darker
1
Brighter
2
The meters and display illuminate when
■
The engine switch is in IGNITION ON mode.

Instrument panel brightness adjustment

■
The instrument panel brightness levels when the tail lights are on and off can be adjusted
individually. However, when the surroundings are bright (daytime, etc.), turning on the tail
lights will not change the instrument panel brightness. At this time, any adjustments made
to the instrument panel brightness levels will be applied to both settings at once.

Outside temperature display

■
In the following situations, the correct outside temperature may not be displayed, or the
display may take longer than normal to change.
When stopped, or driving at low speeds (less than 12 mph [20 km/h])
●
When the outside temperature has changed suddenly (at the entrance/exit of a garage,
●
tunnel, etc.)

Pop-up display

■
In some situations, a pop-up display will be temporarily displayed on the multi-informa-
tion display or the odometer/trip meter screen (F SPORT models only).
The pop-up display function can be set on/off. (P. 89)
Liquid crystal display
■
Small spots or light spots may appear on the display. This phenomenon is characteristic
of liquid crystal displays, and there is no problem continuing to use the display.
Customization
■
The meter display can be customized on the multi-information display. (P. 86)
IS350/300/200t_U (OM53D18U)