Adding Engine Oil; Engine Oil Consumption - Lexus 2016 IS 200t Service Manual

426
7-3. Do-it-yourself maintenance

Adding engine oil

■
If the oil level is below or near the low level mark, add engine oil of the same
type as that already in the engine.
IS350/IS300

Make sure to check the oil type and prepare the items needed before adding
oil.
Engine oil selection
Oil quantity (Low  Full)
Items
Remove the oil filler cap by turning it counterclockwise.
1
Add engine oil slowly, checking the dipstick.
2
Install the oil filler cap by turning it clockwise.
3

Engine oil consumption

■
A certain amount of engine oil will be consumed while driving. In the following situations,
oil consumption may increase, and engine oil may need to be refilled in between oil
maintenance intervals.
When the engine is new, for example directly after purchasing the vehicle or after
●
replacing the engine
If low quality oil or oil of an inappropriate viscosity is used
●
When driving at high engine speeds or with a heavy load, or when driving while accel-
●
erating or decelerating frequently
When leaving the engine idling for a long time, or when driving frequently through
●
heavy traffic
IS350/300/200t_U (OM53D18U)
IS200t

P. 528
1.6 qt. (1.5 L, 1.3 Imp. qt.)
Clean funnel