Table of Contents
Advertisement
into the buckle. Make sure that the
belt is not twisted.
5
Fully extend the shoulder belt and
allow it to retract to put it in lock
mode. In lock mode, the belt cannot
be extended.
6
While pushing the child restraint
system into the rear seat, allow the
shoulder belt to retract until the
child restraint system is securely in
place.
After the shoulder belt has retracted to a
point where there is no slack in the belt,
pull the belt to check that it cannot be
extended.
1-2. Child safety
7
If the child restraint has a top tether
strap, follow the child restraint man-
ufacturer's operation manual
regarding the installation, using the
top tether strap to latch onto the
top tether strap anchor. (P.51)
8
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.48)
Booster seat
■
1
If installing the child restraint sys-
tem to the front passenger seat is
unavoidable, refer to P.43for the
front passenger seat adjustment.
2
Remove the head restraint if it inter-
feres with your child restraint sys-
tem. (P.111)
3
Place the child restraint system on
the seat facing the front of the vehi-
cle.
47
1
Advertisement
Table of Contents
