Selecting Gears In The M Position - Lexus 2016 IS 200t Service Manual

172
4-2. Driving procedures

Selecting gears in the M position

To enter M mode, shift the shift lever to M. Gears can then be selected by oper-
ating the shift lever or paddle shift switches, allowing you to drive in the gear of
your choice.
Upshifting
1
Downshifting
2
The gear changes once every time the
shift lever or paddle shift switch is oper-
ated.
8-speed models: The selected gear,
from M1 to M8, will be fixed and dis-
played in the meter.
6-speed models: The selected gear,
from M1 to M6, will be fixed and dis-
played in the meter.
When in the M position, the gear will not change unless the shift lever or pad-
dle shift switches are operated.
However, even when in the M position, the gears will be automatically
changed in the following situation:
When vehicle speed drops (downshift only).
●
When the automatic transmission fluid or engine coolant temperature is
●
low.
When automatic transmission fluid temperature is high.
●
When the needle of the tachometer is in the red zone (the range which
●
exceeds the allowable revs of the engine).
In the following situations, the gear will not shift even if the shift lever or paddle
shift switches are operated.
"1st Gear not available due to slippery road surface" is displayed on the
●
multi information display.
The vehicle speed is low (upshift only).
●
IS350/300/200t_U (OM53D18U)