Mitsubishi MIRAGE Service Manual page 82

3. Insert the new F.A.S.T.-key into the key
slot.
4. With the first valid F.A.S.T.-key, press the
UNLOCK button for 4 to 10 seconds and
press the LOCK button during this time.
5. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 4. (Per-
form the following procedure within 30
seconds.)
6. With the second valid F.A.S.T.-key, press
the UNLOCK button for 4 to 10 seconds
and press the LOCK button during this
time.
7. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 6. The
immobilizer warning light will blink.
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
When registration of ID code is complete,
the buzzer will sound 3 times and the
immobilizer indicator will come on for 30
seconds.
If an error occurs, F.A.S.T.-key program-
ming will be terminated and the buzzer
will sound for 3 seconds.
NOTE
 F.A.S.T.-key programming will be termi-
nated if the operation mode is put in OFF
before the immobilizer warning light starts
blinking.
8. If you wish to register another F.A.S.T.-
key, repeat the process from step 1 after
the operation mode is put in OFF.
NOTE
 The immobilizer display will go off immedi-
ately if the operation mode is put in OFF.
 It is not possible to register a F.A.S.T.-key if
the immobilizer warning light goes off dur-
ing the procedure.
I n f o r ma t i o n P r o v i d e d b y :
Keyless entry system
Press the remote control transmitter buttons
to lock or unlock the doors and the liftgate.
It can also help you signal for attention by
setting off the panic alarm.
1- LOCK (
) button
2- UNLOCK (
) button
3- PANIC button
4- Operation indicator light
To lock
Press the LOCK button (1) to lock all the
doors and the liftgate.
The turn signal lights will also blink once.
Features and controls
N00515500213
5
5-21