Selecting The Language - Mitsubishi MIRAGE Service Manual

Bluetooth® 2.0 interface (if so equipped)
NOTE
 Call waiting and three-way calls can be used
®
by the Bluetooth 2.0 interface, only if it is
possible to use those services with your cel-
lular phone.
Microphone
5
Your voice will be recognized by a micro-
phone in the overhead console, allowing you
to make hands-free calls with voice com-
mands.
NOTE
 If a cellular phone is within close proximity
of the microphone, it may distort the sound
quality. In this case, place the cellular phone
as far as possible from the microphone.
Voice recognition function
®
The Bluetooth 2.0 interface is equipped
with a voice recognition function.
Simply say voice commands and you can per-
form various operations and make or receive
hands-free calls.
®
With the Bluetooth 2.0 interface, voice rec-
ognition is possible for US English, North
5-84 Features and controls
American Spanish, Canadian French and Jap-
anese. The factory setting is "English."
NOTE
 If the voice command that you say differs
from the predefined command or cannot be
recognised due to ambient noise or some
other reason, the Bluetooth
will ask you for the voice command again up
to 3 times.
 For best performance and further reduction
of ambient noise, the vehicle windows
should be closed, lower the blower speed and
refrain from conversation with your passen-
gers while engaging the voice recognition
function.
 Some voice commands have alternative
commands.
 Depending on the selected language, some
functions may not be available.
 Language can be changed by using the audio
control panel besides the following proce-
dure.
For details, refer to "To change the language
N00564100086
(vehicles with Bluetooth
page 7-25.

Selecting the language

1. Press the SPEECH button.
2. Say "Setup."
3. Say "Language."
I n f o r ma t i o n P r o v i d e d b y :
4. The voice guide will say "Select a lan-
guage: English, Spanish, French or Japa-
nese."
(Example: "English")
5. The voice guide will say "English (Span-
ish, French or Japanese) selected. Is this
correct?" Say "Yes."
If you say "No," the system will return to
®
2.0 interface
Step 4.
NOTE
 The voice guide will repeat the same mes-
sage twice. The first message is in the cur-
rent language, and the second message is in
the selected language.
 If many entries are registered in the vehicle
phonebook, changing the language will take
a longer time.
 Changing the language deletes the mobile
phonebook imported to the Bluetooth
interface. If you wish to use it, you will have
to import it again.
6. When the voice guide says "English
®
2.0 interface)" on
(Spanish, French or Japanese) selected,"
the language change process will be com-
pleted and the system will return to the
main menu.
Say the desired language.
®
2.0