Mitsubishi MIRAGE Service Manual page 187

Heater without air conditioning function (if so equipped)
NOTE
 For quick heating, set the blower speed at the
3rd position.
Combination of unheated air and
heated air
Set the mode selection dial to the positions
shown in the illustration and set the air selec-
7
tion lever to the outside air position.
The air flow will be directed to the leg area
and the upper part of the passenger compart-
ment. Set the desired blower speed.
Warm air flows to the leg area and unheated
or slightly warm air (depending upon the
position of the temperature control lever)
flows to the upper part of the passenger com-
partment.
7-6 Comfort controls
Defrosting or defogging (wind-
shield, door windows)
CAUTION
 For safety, make sure you have a clear view
through all the windows.
N00738400035
Set the mode selection dial (between "
and " ") to remove frost or mist from the
windshield and door window.
For ordinary defrosting
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the mode selection dial to the "
position.
I n f o r ma t i o n P r o v i d e d b y :
2. Set the air selection lever to the outside air
position.
3. Select your desired blower speed by turn-
N00738500081
ing the blower speed selection dial.
4. Select your desired temperature by setting
the temperature control lever.
For quick defrosting
"
1. Set the mode selection dial to the "
position.
2. Set the air selection lever to the outside air
position.
3. Set your blower to the maximum speed.
4. Set the temperature to the highest posi-
tion.
NOTE
 To defog quickly, direct the air flow from the
side vents toward the door windows.
"
"