Mitsubishi MIRAGE Service Manual page 209

To play tracks from USB device (if so equipped)
NOTE
 Depending on the condition of your iPod, it
may take a longer time before the playback
starts.
5. To stop the playback, press the RADIO
button or CD button to switch to a differ-
ent mode.
NOTE
7
 Buttons on the iPod are disabled while the
iPod is connected to the audio system.
 To adjust the volume and tone, refer to "To
adjust the volume" on page 7-18 and "To
adjust the tone" on page 7-19.
To fast-forward/reverse the track
To fast-forward/reverse the current track,
press the button or
Fast-forward
To fast-forward the current track, press the
button. While the button is kept pressed,
the track will be fast-forwarded.
7-28 Comfort controls
Fast-reverse
To fast-reverse the current track, press the
button. While the button is kept pressed, the
track will be fast-reversed.
To select a desired track
Track up
Press the
desired track number appears on the display.
Track down
Press the
desired track number appears on the display.
N00762500033
NOTE
 Pressing the
button.
will cause the audio system to restart play-
back from the beginning of the song.
To find a track from the iPod
menu
You can select desired tracks from the "Playl-
ists", "Artists", "Albums", "Songs" or
N00762600034
button repeatedly until the
button repeatedly until the
button once during the song
N00762700077
I n f o r ma t i o n P r o v i d e d b y :
"Genre" (vehicles with Bluetooth
face) menus on your iPod.
Operate the SEL switch to select desired
tracks.
The selected menu or category or track is
shown in the display.
When this mode is activated by pressing the
SEL switch, the SEL indicator will be dis-
played in the display.
Press the SEL switch :To start this mode or
to select the menu or
category or track.
Turn the SEL switch :To show the menu or
category or track.
NOTE
 To cancel the selection, press the
to return to the previous step.
 If no operation is performed for 10 seconds
or more or other button is operated after the
SEL switch has been pressed, searching of
the desired tracks is canceled.
 If no operation is performed for 5 seconds or
more after the track is displayed, playback
starts.
 When the SEL indicator is not shown on the
display and the SEL switch is operated, the
volume adjustment is activated.
®
2.0 inter-
button