Off Switch; Auto Switch - Mitsubishi MIRAGE Service Manual

Hide thumbs Also See for MIRAGE:
Table of Contents

Advertisement

Personalizing the air conditioning
switch (Changing the function set-
ting)
You can change the following functions to
match your preference.
 Enable automatic air conditioning control:
When the AUTO switch is pressed, or
when the temperature control switch has
been set to the minimum temperature, the
air conditioning switch is automatically
controlled.
 Disable automatic air conditioning con-
trol:
The air conditioning switch is not auto-
matically controlled, unless the air condi-
tioning switch is used.
 Changing the settings
Press the air conditioning switch for about
10 seconds or longer.
When the setting has changed, the system
will beep and the "
" indicator will
flash.
• When the setting has changed from
enabled to disabled,
the system will beep three times and the
indicator will flash three times.
• When the setting has changed from dis-
abled to enabled,
the system will beep two times and the
indicator will flash three times.
NOTE
N00759800090
 The factory setting is "Enable automatic air
conditioning control".
 When the defogger switch is pressed, the air
conditioning will run automatically, even if
the system is set to "Disable automatic air
conditioning control", in order to prevent
windows from fogging up.

AUTO switch

When the AUTO switch is pressed, the mode
selection, blower speed adjustment, recircu-
lated/outside
air
adjustment, and air conditioner ON/OFF sta-
tus are all controlled automatically.
The "AUTO" indicator will be shown in the
display (A).
I n f o r ma t i o n P r o v i d e d b y :
Automatic air conditioning (if so equipped)

OFF switch

N00703500016
Push the switch to turn off the air condition-
ing system.
selection,
temperature
N00703600017
Comfort controls
7-15
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents