Mitsubishi MIRAGE Service Manual page 186

1- Cooler
2- Warmer
Mode selection dial
To change the amount of air flowing from the
vents, turn the mode selection dial. Refer to
"Changing the mode selection" on page 7-2.
Air selection lever
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, use the air selec-
tion lever.
 " " Outside air
 " " Recirculated air
N00738100061
If the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
I n f o r ma t i o n P r o v i d e d b y :
Heater without air conditioning function (if so equipped)
CAUTION
 Using recirculated air for a long time may
N00738200046
cause the windows to fog up.
Operating the system
Heating
Set the mode selection dial to the "
tion and set the air selection lever to the out-
side air position.
Set the temperature control lever to the
desired temperature. Select the desired
blower speed to fit your needs.
N00738300047
" posi-
Comfort controls 7-5
7