Temperature Control Switch; Blower Speed Selection Switch - Mitsubishi MIRAGE Service Manual

Automatic air conditioning (if so equipped)
NOTE
 A sound will be made every time you push
7
any of the switches.

Blower speed selection switch

Press of the blower speed selection
switch to increase the blower speed.
Press of the blower speed selection
switch to decrease the blower speed.
The selected blower speed will be shown in
the display (A).
7-12 Comfort controls
1- Increase
2- Decrease
N00736900179

Temperature control switch

Press or of the temperature control
switch to the desired temperature.
The selected temperature will be shown in the
display (A).
I n f o r ma t i o n P r o v i d e d b y :
NOTE
 While the engine coolant temperature is low,
the temperature of the air from the heater
will be cool/cold until the engine warms up,
even if you have selected warm air with the
switch.
To prevent the windshield and windows from
fogging up, the vent mode will be changed to
" " and the blower speed will be reduced.
 When the temperature is set to the highest or
the lowest setting under the AUTO opera-
tion, the air selection and the air conditioning
will be automatically changed as follows.
• Quick Heating (When the temperature is set
to the highest setting)
Outside air will be introduced and the air
conditioning will stop.
N00737000324
If the air selection and the air conditioning
are operated manually after an automatic
changeover, manual operation will be
selected.
• Quick Cooling (When the temperature is set
to the lowest setting)
Inside air will be recirculated and the air
conditioning will operate.
The above indicates the factory settings. You
can personalize the air selection switch and
air conditioning switch to match your per-
sonal preferences.
Contact your Mitsubishi Motors dealer or a
repair facility of your choice for assistance.