Mitsubishi MIRAGE Service Manual page 190

Set the temperature control lever to the
desired temperature. Select the desired
blower speed to fit your needs.
NOTE
 For quick heating, set the blower speed at the
3rd position.
Cooling
1. Set the mode selection dial to the "
position.
2. Set the air selection lever to the outside air
position.
3. Push the air conditioning switch.
4. Change the temperature by setting the
temperature control lever.
5. Set the desired blower speed.
NOTE
 If the outside air is dusty or contaminated in
some way, set the air selection lever to the
recirculation position. Let in some outside
air from time to time for good ventilation.
 To cool the leg areas, set the mode selection
dial to the " " position.
I n f o r ma t i o n P r o v i d e d b y :
Manual air conditioning (if so equipped)
Combination of unheated air and
heated air
N00731200340
Set the mode selection dial to the positions
shown in the illustration and set the air selec-
tion lever to the outside air position.
The air flow will be directed to the leg area
and the upper part of the passenger compart-
ment. Set the desired blower speed.
Warm air flows to the leg area and unheated
or slightly warm air (depending upon the
position of the temperature control lever)
flows to the upper part of the passenger com-
"
partment.
Comfort controls
N00731300282
7
7-9