Mitsubishi MIRAGE Service Manual page 207

AM/FM electronically tuned radio with CD player (if so equipped)
3. Press the or
"LangChg YES" and then press the
/MENU button to determine.
4. Press the or buttons to select lan-
guage and then press the
ton to determine.
5. Press the or
"LangSet YES" and then press the
/MENU button to determine.
7
To use the external audio input
function
A- Auxiliary Audio connector (Mini-jack)
B- AUX button
C- Display
You can listen to commercially available
audio equipment, such as a portable audio
system, from your vehicle's speakers, by con-
7-26 Comfort controls
necting the audio equipment to the auxiliary
buttons to select
audio connector.
NOTE
 Use a stereo mini-jack connector to connect
/MENU but-
the audio equipment to the auxiliary audio
connector.
buttons to select
To activate the external audio
input mode
1. Connect the headphone port of the porta-
ble audio system to the auxiliary audio
N00703000011 connector using a commercially available
connection cord.
2. Press the AUX button several times to
switch to the AUX mode. The display will
show "AUX" and then the external audio
input mode will be activated.
3. To deactivate the external audio input
mode, press the AUX button to switch to
another mode.
CAUTION
 Do not operate the connected audio equip-
ment while driving.
This could distract you and an accident
might occur.
I n f o r ma t i o n P r o v i d e d b y :
NOTE
 The connected audio equipment cannot be
adjusted using the vehicle's audio system.
 Depending on the connected audio equip-
ment, it may produce noise from the speak-
ers.
 Use the connected audio equipment's own
power source, such as its battery.
Noise may be produced from the speakers if
the connected audio equipment is used while
charging it using the accessory socket of the
vehicle.
 Do not activate the external audio input
mode when no audio equipment is con-
nected.
Otherwise, noise may be produced from the
speakers.
 Connect audio equipment when the external
audio input mode is deactivated or lower the
vehicle's speaker volume before connecting
it.
Noise may be produced from the speakers if
audio equipment is connected after the exter-
nal audio input mode is activated.
 Compared to the CD player mode and radio
mode, the vehicle's speaker volume will be
lower in the external audio input mode.
Therefore, be careful when switching from
the external audio input mode to the CD
player mode or radio mode since the speaker
volume will be higher.
 Do not use excessive force on the connection
cord. Otherwise, the cord and connectors
may be damaged.