Mitsubishi MIRAGE Service Manual page 151

Bluetooth® 2.0 interface (if so equipped)
4. After the voice guide says "Please say,"
the numbers of the music players and
device tags of corresponding music play-
ers will be read out in order, starting with
the music player that has been most
recently connected.
Say the number of the music player that
you want to connect to.
5
When the confirmation function is on, the
system will ask you again whether the
music player that you want to connect to
is correct. Answer "Yes" to continue and
connect to the music player.
Answer "No," and the voice guide will
say "Please say." Say the number of the
music player that you want to connect to.
NOTE
 You can connect to a music player at any
time by pressing the SPEECH button and
saying the number, even before all of the
paired numbers and device tags of corre-
sponding music players are read out by the
system.
5. The selected music player will be con-
nected to the Bluetooth
The voice guide will say "<device tag>
selected" and then the system will return
to the main menu.
5-90 Features and controls
Deleting a device
Use the following procedure to delete a
paired Bluetooth
®
tooth 2.0 interface.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Pairing Options."
4. The voice guide will say "Select one of
the following: pair, edit, delete, or list."
Say "Delete."
5. After the voice guide says "Please say,"
the numbers of the devices and device
tags of corresponding devices will be read
out in order, starting with the device that
has been most recently connected. After it
completes reading all pairs, the voice
guide will say "or all."
Say the number of the device that you
want to delete from the system.
If you want to delete all paired phones
from the system, say "All."
6. For confirmation purposes, the voice
guide will say "Deleting <device tag>
<number>. Is this correct?" or "Deleting
®
2.0 interface.
all devices. Is this correct?"
Answer "Yes" to delete the phone(s).
Answer "No," the system will return to
Step 4.
®
device from the Blue-
I n f o r ma t i o n P r o v i d e d b y :
7. The voice guide will say "Deleted," and
then the system will end the device dele-
tion process.
NOTE
 If the device deletion process fails for some
reason, the voice guide will say "Delete
failed" and then the system will cancel delet-
ing the device.
To check a paired Bluetooth
device
You can check a paired Bluetooth
following the steps below.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Pairing Options."
4. The voice guide will say "Select one of
the following: pair, edit, delete, or list."
Say "List."
5. The voice guide will read out device tags
of corresponding devices in order, starting
®
with the Bluetooth device that has been
most recently connected.
6. After the device tags of all paired Blue-
®
tooth devices have been read, the system
will say "End of list, would you like to
start from the beginning?"
®
N00565200013
®
device by