Mitsubishi MIRAGE Service Manual page 150

NOTE
®
 Depending on the Bluetooth device, it may
take a few minutes to pair it with the Blue-
®
tooth 2.0 interface.
®
 If the Bluetooth 2.0 interface cannot recog-
®
nize the Bluetooth device, the voice guide
will say "Pairing has timed out" and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
®
ports Bluetooth , and try pairing it again.
 If you enter the wrong number, the voice
guide will say "Pairing failed" and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
8. The voice guide will say "Please say the
name of the device after the beep." You
can assign a desired name for the Blue-
®
tooth device and register it as a device
tag. Say the name you want to register
after the beep.
NOTE
 When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?"
Answer "Yes."
To change the device tag, answer "No" and
then say the device tag again.
9. The voice guide will say "Pairing com-
plete," after which a beep will be played
and the pairing process will end.
Selecting a device
®
If multiple paired Bluetooth
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
interface.
You can connect to the other paired cellular
phone or music player by following setting
change procedures.
To select a cellular phone
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Select phone."
4. After the voice guide says "Please say,"
the numbers of the cellular phones and
device tags of corresponding cellular
phones will be read out in order, starting
with the cellular phone that has been most
recently connected.
Say the number of the cellular phone that
you want to connect to.
I n f o r ma t i o n P r o v i d e d b y :
Bluetooth® 2.0 interface (if so equipped)
When the confirmation function is on, the
system will ask you again whether the
phone that you want to connect to is cor-
rect. Answer "Yes" to continue and con-
nect to the cellular phone.
Answer "No," and the voice guide will
N00565100025
say "Please say." Say the number of the
devices are
phone that you want to connect to.
NOTE
®
2.0
 You can connect to a phone at any time by
pressing the SPEECH button and saying the
number, even before all of the paired num-
bers and device tags of corresponding cellu-
lar phones are read out by the system.
5. The selected phone will be connected to
the Bluetooth
guide will say "<device tag> selected"
and then the system will return to the
main menu.
To select a music player
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Select music player."
Features and controls
5
®
2.0 interface. The voice
5-89