Mitsubishi MIRAGE Service Manual page 149

Bluetooth® 2.0 interface (if so equipped)
NOTE
 Pairing is required only when the device is
used for the first time. Once the device has
been paired with the Bluetooth
face, all you need is to bring the device into
the vehicle next time and the device will
connect to the Bluetooth
5
matically (if supported by the device). The
device must have Bluetooth
connect.
®
Up to 7 Bluetooth devices can be paired
®
with the Bluetooth 2.0 interface.
If multiple paired Bluetooth
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
interface.
You can also change a Bluetooth
be connected.
To pair
®
To pair a Bluetooth device with the Blue-
®
tooth 2.0 interface, follow the steps below.
5-88 Features and controls
1. Stop your vehicle in a safe area, put the
gearshift lever in the "N" (Neutral) posi-
tion (manual transaxle), or the selector
lever in the "P" (PARK) position (contin-
®
2.0 inter-
uously variable transmission (CVT)), and
pull the parking brake lever.
®
2.0 interface auto-
NOTE
 You cannot pair any Bluetooth
®
turned ON to
the Bluetooth
cle is parked. Before pairing a Bluetooth
device with the Bluetooth
confirm that the vehicle is parked in a safe
location.
®
devices are
2. Press the SPEECH button.
3. Say "Setup."
®
2.0 4. Say "Pairing Options."
5. The voice guide will say "Select one of
the following: pair, edit, delete, or list."
®
device to
Say "Pair."
NOTE
 If 7 devices have already been paired, the
voice guide will say "Maximum devices
paired" and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to "Selecting a device: Deleting a
device" on page 5-89.)
®
device with
®
2.0 interface unless the vehi-
®
®
2.0 interface,
I n f o r ma t i o n P r o v i d e d b y :
6. The voice guide will say "Please say a 4-
digit pairing code." Say a 4-digit number.
When the confirmation function is on, the
system will confirm whether the number
said is acceptable. Answer "Yes."
Answer "No" to return to pairing code
selection.
NOTE
®
 Some Bluetooth devices require a specific
pairing code. Please refer to the device man-
ual for pairing code requirements.
 The pairing code entered here is only used
®
for the Bluetooth connection certification.
It is any 4-digit number the user would like
to select.
Remember the pairing code as it needs to be
®
keyed into the Bluetooth device later in the
pairing process.
Depending on the connection settings of the
®
Bluetooth device, this code may have to be
entered each time you connect the Blue-
®
tooth device to the Bluetooth
face. For the default connection settings,
refer to the instructions for the device.
7. The voice guide will say "Start pairing
procedure on the device. See the device
manual for instructions." Enter in the
®
Bluetooth device the 4-digit number you
have registered in Step 6.
®
2.0 inter-