Mitsubishi MIRAGE Service Manual page 153

Bluetooth® 2.0 interface (if so equipped)
NOTE
 Hands-free calls may not operate correctly
when you place or receive the call directly
from your cellular phone, instead of using
®
the Bluetooth 2.0 interface.
5
To make a call
You can make a call in the following 3 ways
®
using the Bluetooth 2.0 interface:
- By saying a telephone number
- By using the Bluetooth
phonebook
- By redialing a telephone number
Making a call by using the telephone
number
You can make a call by saying the telephone
number.
1. Press the SPEECH button.
2. Say "Dial."
3. After the voice guide says "Number
please," say the telephone number.
4. The voice guide will say "Dialing <num-
ber recognized>."
®
The Bluetooth 2.0 interface will then
make the call.
5-92 Features and controls
When the confirmation function is on, the
system will confirm the telephone number
again. To continue with that number,
answer "Yes."
To change the telephone number, answer
"No." The system will say "Number
please" then say the telephone number
again.
N00565600020
NOTE
 In the case of English, the system will recog-
nise both "zero" and "oh" (Letter "o") for the
number "0."
®
2.0 interface's
 The Bluetooth
bers (0 to 9) and characters (+, # and *).
 The maximum supported telephone number
length is as follows:
• International telephone number: + and tele-
phone numbers (to 18 digits).
• Except for international telephone number:
telephone numbers (to 19 digits).
Making a call using a phonebook
You can make calls using the vehicle phone-
book or mobile phonebook of the Bluetooth
2.0 interface.
For details on the phonebooks, refer to
"Phonebook function" on page 5-94.
1. Press the SPEECH button.
2. Say "Call."
®
2.0 interface supports num-
®
I n f o r ma t i o n P r o v i d e d b y :
NOTE
 If you say "Call" when the vehicle phone-
book and the mobile phonebook are empty,
the voice guide will say "The vehicle phone-
book is empty. Would you like to add a new
entry now?"
Answer "Yes," and the voice guide will say
"Entering the phonebook - new entry menu."
You can now create data in the vehicle
phonebook.
Answer "No," the system will return to the
main menu.
3. After the voice guide says "Name please,"
say the name you want to call, from those
registered in the phonebook.
4. If there is only 1 match, the system will
proceed to Step 5.
If there are 2 or more matches, the voice
guide will say "More than one match was
found, would you like to call <returned
name>." If that person is the one you want
to call, answer "Yes."
Answer "No," the name of the next
matching person will be uttered by the
voice guide.
NOTE
 If you say "No" to all names read by the sys-
tem, the voice guide will say "Name not
found, returning to main menu" and the sys-
tem will return to the main menu.