Mitsubishi MIRAGE Service Manual page 213

Hide thumbs Also See for MIRAGE:
Table of Contents

Advertisement

To play tracks from USB device (if so equipped)
3. After the voice guide says "What Genre
would you like to play?," say the music
type.
4. If there is only one match, the system pro-
ceeds to step 6.
5. If there are two or more matches, the
voice guide will say "More than one
match was found, would you like to play
<genre>?" If you say "Yes," the system
proceeds to step 6.
If you say "No," the next matching genre
7
is uttered by the system.
NOTE
 If you say "No" to three or all genres uttered
by the system, the voice guide will say
"Genre not found, please try again" and the
system returns to step 2.
6. After the voice guide says "Playing
<genre>," the system creates an index for
the genre.
NOTE
 If the confirmation function is active, the
voice guide confirms if the genre is correct.
If the genre is correct, say "Yes". If not, say
"No". After the voice guide says "Genre not
found, please try again," the system returns
to step 2. Refer to "Confirmation function
setting" on page 5-85.
7-32
Comfort controls
7. The system exits the voice recognition
mode and starts playback.
USB control panel and display
1- CD (Mode changeover) button
2- RADIO button
3- DISP (Title display)/
(Return) but-
ton
4-
(USB device active) indicator
5- USB indicator
6- Display
7- TRACK indicator
8- RPT (Repeat mode)/F-RPT (Folder
repeat mode) indicator
9- RDM (Random mode)/F-RDM (Folder
random mode) indicator
10- SEL (Select) indicator
11- PAGE (Title scroll) button
12-
(Fast-reverse/Track down) button
13-
(Fast-forward/Track up) button
I n f o r ma t i o n P r o v i d e d b y :
14- PWR (On-Off)/SEL (Select) switch
15- RPT (Repeat) button
16- RDM (Random) button
To play from a USB memory
N00763900063
device
1. Press the PWR switch to turn on the audio
system. The system turns on in the last
mode used.
2. Connect your USB memory device to the
USB input terminal.
Refer to "How to connect a USB memory
device" on page 5-101.
3. Press the CD button several times to
switch to the USB mode. The input mode
changes as follows every time the CD but-
ton is pressed: CD mode  USB mode
®
Bluetooth
mode (if so equipped) 
AUX mode  CD mode.
The USB indicator are illuminated and
then the USB mode will be activated.
4. Once the device is selected, playback
starts and
indicator appears on the dis-
play.
NOTE
 Depending on the condition of your USB
device, it may take a longer time before the
playback starts.
N00764000087

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents