To Play Tracks From A Bluetooth Device (Vehicles With Bluetooth 2.0 Interface) - Mitsubishi MIRAGE Service Manual

NOTE
 If no title is stored, "NO TITLE" is shown in
the display.
 Characters that cannot be displayed are sub-
stituted by
"•".
To play USB memory device
tracks via voice operation (vehi-
®
cles with Bluetooth 2.0 inter-
face)
Desired tracks can be selected and played
from your USB memory device by "Artist",
"Album", "Playlist" and "Genre" using voice
commands.
For information concerning the voice recog-
nition function or speaker registration func-
®
tion, refer to "Bluetooth 2.0 interface" on
page 5-81.
The playback sequence of tracks is the same
as when an iPod is connected. Refer to the
"To play iPod tracks via voice operation" on
page 7-29.
Preparation for voice operation
To use the voice operation, press the
SPEECH button (A) first.
To play tracks from a Bluetooth® device (vehicles with Bluetooth® 2.0 interface)
To play tracks from a Blue-
N00765200073
®
tooth device (vehicles with
®
Bluetooth 2.0 interface)
You can wirelessly connect a digital audio
player or cellular phone supporting Blue-
®
tooth to listen to the tracks on the connected
device.
Refer to "Bluetooth
connecting method, etc. on page 5-81.
The following explains the basic playback
method.
I n f o r ma t i o n P r o v i d e d b y :
 Depending on the connected device, opera-
 Depending on the connected device, the
 A file protected by copyright might not be
 It is recommended to adjust the equaliser of
 The voice operation is not available to access
Bluetooth
and display
N00765300104
®
2.0 interface" for the
1- CD (Mode changeover) button
2- PWR (On-Off) switch
3- BT (Bluetooth
NOTE
tion of the connected device is limited to its
available functions.
device may not operate correctly.
able to playback.
the connected device to 0 db or neutral.
music files on the connected Bluetooth
device.
®
device control panel
®
) indicator
Comfort controls
7
®
N00765400062
7-35