Firmware Update; How To Update Firmware - Polar Electro M450 User Manual

Calibrate power
l
tings from pre-training mode and you have paired the sensor. For more information on calibration, see
Polar LOOK Kéo Power Sensor Bluetooth®
Bike settings:
l
Calibrate altitude:Set the correct altitude. It is recommended to always manually calibrate altitude
l
when you know your current altitude.
Speed settings:
l
If you have chosen imperial units, choose
speed zone limits: Check the limits for each speed zone.
Automatic pause
l
your session is automatically paused when you stop moving.
which recording is paused.
Automatic lap:Choose Off,
l
tance after which each lap is taken. If you choose
is taken.
To use automatic pause or distance-based automatic lap, you must have the GPS function on or Polar
Speed Sensor Bluetooth® Smart in use.

FIRMWARE UPDATE

The firmware of your M450 can be updated. Any time a new firmware version is available, FlowSync will notify
you when connecting M450 to your computer with the USB cable. The firmware updates are downloaded via
the USB cable and FlowSync software. Flow app will also notify you when new firmware is available.
Firmware updates are performed to improve the functionality of your M450. They can include improvements to
existing features, completely new features or bug fixes, for example.

HOW TO UPDATE FIRMWARE

To update the firmware of your M450, you must have:
A Flow web service account
l
Installed FlowSync software
l
Registered your M450 in the Flow web service
l
Go to flow.polar.com/start, and create your Polar account in the Polar Flow web service and download
and install FlowSync software onto your PC.
To update the firmware:
sensor: Power sensor calibration is visible only when accessing sport profile set-
Used sensors: View all the sensors you have linked to the bike.
Speed view: Choose
sett.: Automatic pause: Choose
Lap distance
Smart.
km/h (kilometers per hour) or
mph (miles per hour) or
On or Off. If you set the automatic pause On,
Activation
or Lap duration. If you choose
Lap duration, set the duration after which each lap
26
min/km (minutes per kilometer).
min/mi (minutes per mile).
speed: set the speed at
Lap distance, set the dis-
Check