Table of Contents
Advertisement
3. Press START,
4. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your
M450.
5.
Pairing completed
or
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device
played.
3. In M450 time mode, press and hold BACK.
4.
Connecting to device
5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your
M450.
6.
Pairing completed
DELETE A PAIRING
To delete a pairing with a sensor or mobile device:
1. Go to
Settings > General settings > Pair and sync > Paired devices
2. Choose the device you want to remove from the list and press START.
3.
Delete pairing?
4.
Pairing deleted
Connecting to device
is displayed when you are done.
is displayed, followed by
is displayed when you are done.
is displayed, choose
is displayed when you are done.
is displayed, followed by
Connecting to
Yes
and press START.
18
Connecting to
app.
(Searching for Polar
app.
and press START.
M450) is dis-
Advertisement
Table of Contents
