Pair Kéo Power With M450 - Polar Electro M450 User Manual

Hide thumbs Also See for M450:
Table of Contents

Advertisement

Kéo Power Essential Bluetooth® Smart is an economical choice for basic power measurement. It meas-
ures your power output and force with the left hand pedal and provides your total power/force by multiplying
the measurement by two. The set includes two pedals and one power transmitter.
PAIR KÉO POWER WITH M450
Before pairing Kéo Power make sure you have installed it correctly. For information on mounting the pedals
and installing the transmitters see the Polar LOOK Kéo Power user manual that came in the product box, or
the video tutorial.
If you have two power transmitters, you need to pair the transmitters one at a time. After pairing the first trans-
mitter, you can immediately pair the second one. Check the device ID on the backside of each transmitter to
make sure you find the correct transmitters from the list.
There are two ways to pair Keó Power with your M450:
1. Go to
General Settings > Pair and sync > Pair other device
2. Rotate the cranks to wake up the transmitters. M450 starts searching for Kéo Power.
3. Once the it is found,
4. Press START,
5.
Pairing completed
6.
Sensor linked to:
have another pedal to pair?
one.
7.
Set crank
length: Set the crank length in millimeters.
The first cycling sensor you pair will automatically be linked to
or
1. Press START in time view to enter pre-training mode.
2. Rotate the cranks to wake up the transmitters.
3. The device ID
Pair Polar PWR xxxxxxxx
4.
Pairing completed
5.
Sensor linked to:
have another pedal to pair?
one.
6.
Set crank
length: Set the crank length in millimeters.
Polar PWR xxxxxxxx
Pairing
is displayed.
is displayed when you are done.
is displayed. Choose
is displayed. If you have two transmitters, choose
is shown when you are done.
is displayed. Choose
is displayed. If you have two transmitters, choose
is displayed.
Bike
1,
Bike 2
or
Bike
is displayed. Choose Yes.
Bike
1,
Bike 2
or
Bike
33
and press START.
3. Confirm with START.
Yes
to pair the other
Bike
1.
3. Confirm with START.
Yes
to pair the other
Do you
Do you

Advertisement

Table of Contents
loading

Table of Contents