Table of Contents
Advertisement
•
Lock buttons: Press START to lock buttons. To unlock, press and hold LIGHT.
•
Set front lighton or off.
•
Training sounds: Choose Off, Soft, Loud or Very loud.
•
Heart rate settings: Heart rate view: Choose Beats per minute (bpm) or % of maximum. Check HR zone
limits: Check the limits for each heart rate zone. HR visible to other device: Choose On or Off. If you choose On,
other compatible devices (e.g. gym equipment) can detect your heart rate.
•
Bike power settings: Power view: Set how you want to view your power data (Watts (W), Watts/kg (W/kg) or
% of FTP). Power, rolling average: Choose 1, 3, 5, 10, 15, 30 or 60 second rolling average of power data. Set
FTP value: Set your FTP (Functional Threshold Power) value. The setting range is 60 to 600 watts. Check power
zone limits: Check your power zone limits.
Bike power settings are visible only if you have paired the sensor. For more information on calibration, see
Polar LOOK Kéo Power Sensor Bluetooth® Smart.
•
GPS recording: Choose Off or On.
•
Calibrate power sensor: Power sensor calibration is visible only if you have paired the sensor. For more inform-
ation on calibration, see Polar LOOK Kéo Power Sensor Bluetooth ® Smart.
•
Bike settings: Used sensors: View all the sensors you have linked to the bike.
•
Calibrate altitude: Set the correct altitude. It is recommended to always manually calibrate altitude when you
know your current altitude.
•
Speed settings: Speed view: Choose km/h (kilometers per hour) or min/km (minutes per kilometer). If you
have chosen imperial units, choose mph (miles per hour) or min/mi (minutes per mile). Check speed zone limits:
Check the limits for each speed zone.
•
Automatic pause sett.: Automatic pause: Choose On or Off. If you set the automatic pause On, your session
is automatically paused when you stop moving. Activation speed: set the speed at which recording is paused.
•
Automatic lap: Choose Off, Lap distance or Lap duration. If you choose Lap distance, set the distance after
which each lap is taken. If you choose Lap duration, set the duration after which each lap is taken.
To use automatic pause or distance-based automatic lap, you must have the GPS function on or Polar Speed
Sensor Bluetooth® Smart in use.
FIRMWARE UPDATE
The firmware of your M460 can be updated. Any time a new firmware version is available, FlowSync will notify you
when connecting M460 to your computer with the USB cable. The firmware updates are downloaded via the USB
cable and FlowSync software. Flow app will also notify you when new firmware is available.
Firmware updates are performed to improve the functionality of your M460. They can include improvements to exist-
ing features, completely new features or bug fixes, for example.
HOW TO UPDATE FIRMWARE
To update the firmware of your M460, you must have:
27
Advertisement
Table of Contents
