Prepare the tape roll for operation
Procedure
1.
Remove the protection sheet from the tape.
[128] Peeling off the protection sheet
2.
Guide the protection sheet back between the upper and lower knife.
[129] Leading the protection sheet between upper and lower knife
3.
Lift the guide and move the protection sheet between the protection sheet rollers. Pull the
protection sheet tight.
[130] Leading the protection sheet between the rollers
4.
Insert the strip of the tape into the closed section of the slide.
Chapter 7 - Maintain and troubleshoot the Océ PlotWave 750 system
Prepare the tape roll for operation
275