Available Settings For Copy Jobs - Oce PlotWave 750 Operation Manual

Available settings for copy jobs

Available settings for copy jobs
Introduction
The Océ PlotWave 750 provides a lot of settings to manage all your different copy jobs. These
settings are used for extended copy jobs. The following table gives an overview and a very short
description of the available settings. A detailed description of each setting can be found in the
online help of Océ Express WebTools. You can change the default value of a setting that you use
very often in the copy template in Océ Express WebTools.
Available settings for copy jobs
The available settings for copy jobs – a setting can contain more than one setting.
Setting
[Original type]
[Scale]
[Media]
[Lighter/darker]
[Remove strip]
178 Chapter 5 - Use the Océ TC4 scanner for copy and scan-to-file jobs
Function
Define the type of original you use
[32] [Original type] (example)
Scale an original
[33] [Scale] (example)
Define the type of media used
[34] [Media] (example)
Make a lighter or darker copy
[35] [Lighter/darker] (example)
Copy without strips
[36] [Remove strip] (example)
4