Printer Operator Panel Actions - Oce PlotWave 750 Operation Manual

Printer operator panel actions

On the Océ PlotWave 750 printer operator panel you can perform a limited number of actions in
the off-line menu. The tables below display the settings.
Offline menu options
Offline menu
Menu
Language
Offline folding (optional)
Media
Key operator settings
Use the key above the graphical display of the printer operator panel to access the following
options. Make sure that the printer is put in offline mode first.
NOTE
The settings you access via this key are not the same as the key operator settings in the Océ
PlotWave 750 Express WebTools application.
Secondary menu(s)
List of 2 languages
Input
• Method
• Legend
Binding
• Binding
• Reinforce
Binding
• Edge
• On/Off
Package
• Width
• Length
Special
• Knife
Roll
• Type
• Material
• Size
Manual
• Type
• Material
• Size
Sheets
• Type
• Material
• Size
Printer operator panel actions
Description
You can toggle between the 2
main languages on the printer
Select a
operator panel. See
language on page 43.
All the settings except the
Special setting are job settings
that can be set for an individu-
al offline folding job. The de-
fault values for these settings
are set by the key operator in
the Océ PlotWave 750 Express
WebTools application.
You can use the Media menu
to define the contents of the
media drawer(s) and/or sheet
feeder(s) and the manual feed-
er.
Chapter 2 - Introduction 41