Change The Password For Authorized Users - Oce PlotWave 750 Operation Manual

Change the password for authorized users

Change the password for authorized users
When to do
For security reasons it is advised to periodically change the password for the 3 access modes
(Key operator, System administrator, Power user) to the Océ Express WebTools.
The default passwords are:
• [Key operator password]: KeyOp
• [System administrator password]: SysAdm
• [Power user password]: PowUsr
IMPORTANT
Handle and store all passwords securely and with care. The machine has to be reinstalled in case
of forgotten passwords.
Procedure
1.
Click [Configuration] - [Connectivity] - [Passwords].
2.
Expand the [Passwords] section.
3. Depending on the password you want to change, select [Key operator password], [System
administrator password] or [Power user password]. A secondary window appears.
4. Log in as Key operator to change the key operator password. The default key operator password
is KeyOp.
Log in as System administrator to change the system administrator password. The default
system administrator password is SysAdm.
Log in as Power user to change all the passwords. The default power user password is PowUsr.
NOTE
The passwords are case sensitive. You can only use characters from the following range:
A-Z
a-z
0-9
_ - ~ ! ? @ # $ % ^ * + = , . : ; / | [ ] ( ) { }
You cannot use Chinese, Cyrillic or Japanese characters.
5.
Enter the new password twice to confirm your input. The password is hidden.
6.
Click [Ok] to confirm your entries or [Cancel] to reject your entries.
Example
The [System administrator] or [Power user] can also change the [Océ service] password when the
security policy requires it.
The Océ technician will need this password to perform Service operations on the printer.
106 Chapter 3 - Define your workflow with Océ Express WebTools