The System Monitor - Oce PlotWave 750 Operation Manual

The system monitor

The system monitor
Introduction
You can open the system monitor to get an overview of the current status of the printing system.
When you click on the [System] tab in the lower left corner of the screen, the system monitor
pops up.
The system state (for example: [Printing:]) is displayed in the upper right corner of the system
monitor section of the Océ Express WebTools.
Overview of the system states
State
[User intervention re-
quired]
[System memory is full]
[Sleeping...]
[Ready to print]
[Printing:] <job-name>
[Processing:] <job-name>
[Receiving:] <job-name>
'Printer paused'
'E-shredding ready'
'Media indication'
[The system is not connec-
ted to Océ Remote Service]
[The system is trying to
connect to Océ Remote
Service]
[The system is connected
to Océ Remote Service]
The media status:
48 Chapter 3 - Define your workflow with Océ Express WebTools
Icon Description
The user is requested to go to the printer and follow the
instructions displayed on the operator panel.
Status message when printer does not print because the
system memory is full.
Energy saving state: State when not all functionality is
available due to printer sleeping.
State when there is no active job and no waiting job.
When a job arrives, no user intervention is needed to
start printing.
State when a print job is active.
The system is processing the job data.
The system is receiving the job data.
State of the printer that has been set to 'Pause' on the
operator panel.
Ready for E-shredding.
Roll media and roll width indication for roll 1 ... 6 (if
available) and cut sheet tray 1 and 2 (if available) .
The system is not connected to Océ Online services. The
tooltip contains detailed information on why the system
is not connected.
The system tries to make a connection with Océ Online
services ([Remote Assistance] option).
The system is connected to Océ Online services ([Re-
mote Assistance] option).