How To Configure The Network Settings In The Océ Express Webtools - Oce PlotWave 750 Operation Manual

How to configure the network settings in the Océ Express WebTools
How to configure the network settings in the Océ Express WebTools
Procedure
1. The relevant IP settings are displayed based on the [IP type] you selected.
2. Enable IP address assignment by DHCP when a DHCP server is available, or enter the IP address
of the system and the subnet mask manually
3.
Enable preferred DNS configuration by DHCP when a DHCP server is available, or enter the IP
address of the DNS server manually
4.
Restart the system to apply the new network settings.
Configure the protocols
Procedure
1.
Select a protocol (for instance: FTP)
2.
Enable (or disable) it
3.
Configure the protocol settings (for instance the 'Time-out')
4. Restart the system to enable or disable the protocol
102 Chapter 3 - Define your workflow with Océ Express WebTools