Oce PlotWave 750 Operation Manual page 40

The printer operator panel
The counter
On the operator panel of the Océ PlotWave 750 printer, a counter is displayed to give the user
feedback about the progress of the job that is currently being printed. The counter, which is
located at the bottom of the upper window on the operator panel, displays the number of sets
and/or pages printed. Counting starts at 1.
The following information is available.
• When no sets are made, only the current page and the total number of pages are displayed
(e.g. "Page 3 of 5"). At the beginning of a job, when the system does not know the total
number of pages yet, only the current page may be displayed (e.g. "Page 5").
• With set input: set counter. In this case the counter shows the current, the total number of sets
and the current page (e.g. "Set 3 of 5, Page 10"). At the beginning of a job, when the system
does not know the total number of sets yet, only the current set and page may be displayed
(e.g. "Set 2, Page 5").
• With set input: multiple sheet counter. In this case the counter shows the current page, the
total number of pages and the current copy, e.g. "Page 2 of 12, Copy 5"). At the beginning of a
job, when the system does not know the total number of pages yet, only the current page and
copy may be displayed (e.g. "Page 2, Copy 5").
40 Chapter 2 - Introduction