Define A Scan-To-File Template - Oce PlotWave 750 Operation Manual

Define a scan-to-file template

Define a scan-to-file template
Introduction
When you want to scan an image to generate a file from it, go to Océ Express WebTools to:
• first configure the scan-to-file destination
• then define a scan template to use on the scanner
NOTE
Before you can edit a setting, you must be logged on as System administrator or a Power user.
NOTE
In order to create a basic scan-to-file template, go to the [Templates] tab, choose one of the scan
template numbers and edit the settings.
Illustration
[22] Template settings in Océ Express WebTools
1- Configure the [Scan destinations]
A scan destination is a place where you send your scanned file to for storage.
You can define a maximum number of 10 scan destinations in the [Configuration] - [Scan
destinations] tab.
Refer to the
destination.
2- Define the settings for the Scan templates (1 to 5)
1. Click [Preferences]. Choose your template, for example [Scan template 3].
126 Chapter 3 - Define your workflow with Océ Express WebTools
Configure scan destinations on page 129
section for all details on how to set a scan