Stop A Scan-To-File Job - Oce PlotWave 750 Operation Manual

Stop a scan-to-file job

Stop a scan-to-file job
Introduction
You can stop a scan-to-file job with the red Stop key at the scanner operator panel.
Procedure
1.
Press the red Stop key.
Result
When you press the red Stop key while the scanner scans, the scan process stops. The scanner
rewinds the original and the scan-to-file job is canceled.
When you press the red Stop key while the scanner rewinds, the rewind process continues. The
scan-to-file job is canceled.
198 Chapter 5 - Use the Océ TC4 scanner for copy and scan-to-file jobs