Chapter 3 — Configuring the Printer
68
Configuring Web Shell Settings
Use the Web Shell page to view and change test and default settings.
You can also use the Web Shell page to print test labels and change the
command language.
To configure Web Shell settings
1 Click Printer > Web Shell.
2 Select the action you want to take or the setting you want to
change.
•
For the actions at the top of the screen, the printer performs
the action and may prompt you to reboot the printer.
•
For the settings at the bottom of the screen, select the settings
you want and click Submit Setup. A message appears stating,
"Application change will take effect at reboot." You can select
Reboot or wait until you are done making other configuration
changes.
Use the following table to understand the Web Shell settings.
Understanding the Web Shell Settings
Setting
Description
Testfeed [value] Calibrates the label stop sensor performs a testfeed.
Selecting this setting is equivalent to issuing the
TESTFEED command on the printer.
Ribbon Sensor
Detects if the printer runs out of ribbon during printing.
[value]
PF2i and PF4i Mid-Range Printer User's Manual