Intermec PF2i User Manual page 99

PF2i and PF4i Mid-Range Printer User's Manual
Understanding the 802.1x Settings (continued)
Setting
Inner
Authentication
(TTLS, EAP-FAST,
and PEAP only)
Outer Name (TTLS
only)
PAC- Key A-ID Info The Protected Access Credential (PAC) setting
Automatic
Provision (PAC)
Root Certificate
Server Common
Name #1
Server Common
Name #2
(TTLS and PEAP
only)
Server Certificate
Validation (TTLS
and PEAP only)
Chapter 3 — Configuring the Printer
Description
Choose the inner authentication method:
•
PAP (TTLS only)
•
MSCHAPv2
•
EAP/MSCHAPv2
•
EAP/MD5
•
EAP/GTC
Specify the EAP identity passed in the clear. The default
is .
anonymous
is used to specify the PAC file used by EAP-FAST
authentication. This setting is automatically filled up
by the printer if ACQUIRE_PAC is enabled and current
installed PAC file fails authenticating the printer to the
network. You can manually import a PAC file using a
pass phrase the same way you install a certificate.
Set Automatic PAC file Provisioning to on or off.
The common name of the installed root CA certificate.
You can also specify a different certificate (provided
that it has already been installed on the printer) by
entering the path to the new certificate in this field. If a
pass phrase is required, add it to the end of the path in
the form of "@passphrase".
Specify common names. If you specify one common
name, the server certificate common name must match
this name for authentication. If you specify two
common names, the server certificate common name
must match at least one of them. The default is "" (any
common name).
Enables certificate validation. Specifies whether or not
to check if the installed CA certificate is the root of the
server certificate.
85