Loading Media For Cut-Off Printing (Pf4I Only) - Intermec PF2i User Manual

Chapter 1 — Using the Printer

Loading Media for Cut-Off Printing (PF4i Only)

24
You can install the automatic paper cutter option to cut off the
media. Cut-off printing can be used for non-adhesive continuous
stock and self-adhesive labels with liner (cut only liner between
labels). The cutter option:
• is designed for paper-based media with a thickness between
60 and 175 μm, roughly corresponding to a paper weight of
60 to 175 grams/m
should not be used to cut through labels, because the adhesive
•
sticks to the shears, which can damage the cutter.
• can be used with both standard edge guide and the quick-load
guides.
You can also install an optional label taken sensor so that the next
copy in the batch is not printed until the current copy is removed. For
more information, see
To load media for cut-off printing
1 Turn off the printer.
2 Open the cutter and media cover.
2
(basis weight 40 to 120 lb).
"Accessories for the Printer" on page
PF2i and PF4i Mid-Range Printer User's Manual
145.