Configuring The Network Type - Intermec PF2i User Manual

PF2i and PF4i Mid-Range Printer User's Manual

Configuring the Network Type

Use the Network Type page to choose whether you are using an
Ethernet or wireless 802.11 network.
To configure the network type
1 Click Network Admin > Network Type.
2 Select either Ethernet or Wireless 802.11.
3 Click Submit new settings.
4 Reboot the printer for the changes to take effect.
Note: Once you change the network type to Wireless 802.11, you
cannot communicate with the printer using Ethernet. You need to
change the command through the Setup menu or send a command
through a serial connection.
Chapter 3 — Configuring the Printer
79