Intermec PF2i User Manual page 133

PF2i and PF4i Mid-Range Printer User's Manual
Chapter 4 — Troubleshooting and Maintaining the Printer
3 Turn the printhead lift lever clockwise to raise the printhead.
4 Remove any media and ribbon.
5 Open the cleaning card envelope and pull out the cleaning card.
Read the warning text.
6 Insert most of the cleaning card under the printhead, and then
lower the printhead.
7 Pull out the cleaning card and raise the printhead.
8 Wait for approximately 30 seconds to allow the cleaning fluid to
dissolve the residue.
9 Repeat Steps 6 through 8.
10 If necessary, repeat the process with a fresh cleaning card.
11 Allow the cleaned parts to dry before loading media and ribbon.
119