Intermec EasyCoder PF2i User Manual
  1. Manuals
  2. Brands
  3. Intermec Manuals
  4. Barcode Reader
  5. EasyCoder PF2i
  6. User manual

Intermec EasyCoder PF2i User Manual

Bar code label printer fingerprint version
Hide thumbs Also See for EasyCoder PF2i:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
User's Guide
EasyCoder PF2i
Bar Code Label
Printer
(Fingerprint Version)

Advertisement

Table of Contents
loading

Related Manuals for Intermec EasyCoder PF2i

Summary of Contents for Intermec EasyCoder PF2i

  • Page 1 User’s Guide EasyCoder PF2i Bar Code Label Printer (Fingerprint Version)
  • Page 2 Service support: +46 31 869500 The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and/or service Intermec manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec.

  • Page 3: Table Of Contents

    Controls and Indicators ............... 14 Control Lamps .............. 14 Display ................14 Keyboard ............... 15 Beeper ................15 Starting Up Startup Files ................. 18 Memory Card ................19 Switching On the Printer ............. 20 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 4 Media Size............50 Media Type ............. 52 Paper Type............53 Contrast ............55 Testfeed............55 Print Defi nes ..............55 Head Resistance ..........55 Testprint............55 Print Speed............57 LTS (Label Taken Sensor)........ 58 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 5 Maintenance Printhead Cleaning ..............90 External Cleaning ................ 93 Cleaning the Media Guides............94 Printhead Replacement ..............95 Media Jams .................. 98 Adjustments Narrow Media Adjustment............100 Label Stop Sensor Position Adjustment ........102 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 6 Optional Interfaces ..............127 Intermec Supplies Direct Thermal Media..............130 Thermal Transfer Media............. 131 Transfer Ribbons................ 132 Bar Code Directions ..............133 Recommended Paper Type Settings (Europe) ......134 Recommended Paper Type Settings (North America) ....135 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 7: Fcc Notice (U.s.a.)

    EU Standard EN 55022 (The European Union) WARNING This is a Class A ITE product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 8: Declaration Of Conformity (Ce)

    89/336/EEC and 73/23/EEC Mölndal 2003-03-12 ..............Per-Ove Jacobsson /. Intermec assumes no responsibility regarding the CE Directive if the printer is handled, modifi ed, or installed in other manners than those described in Intermec’s manuals. viii Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 9: Introduction

    Introduction This chapter introduces the EasyCoder PF2i printer. The chapter covers the following topics: • Description of EasyCoder PF2i • Safety summary • Product identifi cation Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 10: Description Of Easycoder Pf2I

    BASIC-like environment. EasyCoder PF2i is also designed to work with the Intermec Direct Protocol programming language, the Intermec InterDriver and Intermec Labelshop. The InterDriver allows you to print labels from standard MS Windows applications, for example Microsoft Offi...

  • Page 11: Safety Summary

    Chapter 1—Introduction Safety Summary Intermec assumes no responsibility regarding the CE Directive if the printer is handled, modifi ed, or installed in any way other than that described in Intermec’s manuals. • Read this manual carefully before connecting the printer.
  • Page 12 Chapter 1—Introduction Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 13: Installation

    Installation This chapter explains how to unpack and install the EasyCoder PF2i printer and also describes the printer’s various parts in detail. It covers the following topics: • Unpacking the printer • Parts on the printer’s front • Parts on the printer’s rear plate •...

  • Page 14: Unpacking The Printer

    230 VAC plug If the printer has been damaged in any way during transportation, com- plain to the carrier immediately. If the delivery is incorrect or any parts are missing, report it immediately to the distributor. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 15: Front View

    These features allow the operator to control and set up the printer manually. The printed labels, tickets, or tags are presented at the front of the print mechanism. Control lamps Display window Keyboard Print button Print mechanism Side door Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 16: Rear View

    Provision for EasyLAN Ethernet connection (option) Memory card slot Provision for one optional interface board On/Off Switch Bar code wand socket AC Power cord socket RS-232 serial interface ("uart1:") USB Interface ("usb1:") Machine label Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 17: Media Compartment

    There is also an optional rotating media supply hub. Also see Chapter 9, “Options.” Media supply roll post with edge guide Print mechanism Optional integral liner takeup with guide shaft Long side door Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 18: Media Supply Roll Post

    Chapter 2—Installation The EasyCoder PF2i uses a media supply roll post that can be fi tted in three different positions inside the media compartment. The position depends on the type of side door (long or short) and whether the printer is fi...

  • Page 19: Media Supply Positions

    Maximum roll size is 213 mm (8.38 inches). • Position 4 is not used. The printer can also use an external media supply located behind the printer. Position 3 Position 1 Position 2 Position 4 (not used) Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 20: Print Mechanism

    Chapter 9 “Options” for illustrations of the thermal transfer mechanism, which is partly integrated with the print mechanism. Locking screw Thermal printhead Pressure arm Edge guide Tear bar Printhead lift lever Platen roller Label stop sensor position adjustment (bottom sensor hidden) Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 21: Connections

    3 Connect the power cord from the socket on the rear plate to an electrical outlet (90 to 265 VAC). Computer The Easycoder PF2i is fi tted with one 9-pin D-style subminiature (DB9) socket for the RS-232 serial interface port and one class B connector for the USB interface port (see Appendix C).

  • Page 22: Controls And Indicators

    Chapter 2—Installation Controls and Indicators The EasyCoder PF2i has several ways of communicating directly with its operator: three control lamps, a display window, a membrane-switch key- board with 22 programmable keys, a big programmable “Print” button on the printer’s front, and a beeper.

  • Page 23: Keyboard

    Beeper The beeper notifi es the operator when an error has occurred and acknowledges that a key has been pressed. The Intermec Fingerprint pro- gramming language allows the key acknowledge signal to be turned off. The frequency and duration of signals can be specifi ed. Thus, it is pos-...
  • Page 24 Chapter 2—Installation Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 25: Starting Up

    This chapter explains how to start up the printer after installation or after having been switched off. It covers the following topics: • Startup fi les • Memory cards • Switching on the printer • Display messages at startup Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 26: Startup Files

    B In addition to Intermec Shell, the printer is also fi tted with a custom- made application program that is design to perform a specifi c task, for example to print tickets, baggage tags, or product labels for a certain company.

  • Page 27: Memory Card

    Note: Always switch off the power before inserting or removing a memory card! The card will only fi t in one way. A memory card is only detected if it is inserted before the printer is started. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 28: Switching On The Printer

    1 sec. v.8.0 Refer to Chapter 8 for more information on Intermec Shell. The digits in the lower right corner of the display indicate the version of Intermec Shell. B. Custom-Made Application Program Any other display messages than those illustrated above indicates that the printer is running some custom-made, non-standard application pro- gram, or that some error has occurred.

  • Page 29: Media Load

    This chapter explains how to load the printer with media, that is labels, tickets, tag, or strips, for the fol- lowing modes of operation: • Tear-Off (straight-through) • Tear-Off with Quick-Load (straight-through) • Peel-Off (self-strip) • External supply (fan-folds) Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 30: Tear-Off (Straight-Through)

    Chapter 4—Media Load Tear-Off (Straight-through) The EasyCoder PF2i can print on labels, tickets, tags, and continuous stock in various forms. This section describes the case when the media is torn off manually against the printer’s tear bar. This method is also known as “straight-through printing.”...
  • Page 31 Fit a new roll of media on the supply post and adjust the edge guide so Remove any empty core from the media the roll becomes fl ush with the center supply roll post. section. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 32 This diagram shows the media path. Adjust the position of the green edge Turn the printhead lift lever counter- guide so the media is guided with a clockwise to engage the printhead. minimum of play. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 33 Chapter 4—Media Load Tear-Off , cont. Press the Feed key to advance the media Close the side door. and adjust the media feed. To tear off the media, grab the outer edge and pull downwards. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 34: Tear-Off (Straight-Through) With Quick-Load

    Tear-Off with Quick-Load (Straight-through) In addition to the media load procedure for tear-off (straight-through) operation described earlier in this chapter, the EasyCoder PF2i can optionally be fi tted with a set of Quick-Load guides that makes media load much easier and quicker, especially if the printer has a short side door.
  • Page 35 Insert the media between the guides and feed it forward until the media If necessary, adjust the outer Quick- reaches the platen roller and cannot be Load guide to fi t the width of the media. inserted any further. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 36 Chapter 4—Media Load Tear-Off with Quick-Load, cont. Keep pushing the media forward while To tear off the media, grab the outer pressing the Feed key. edge and pull downwards. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 37: Peel-Off (Self-Strip)

    Chapter 4—Media Load Peel-Off (Self-strip) The EasyCoder PF2i can print on labels, tickets, tags, and continuous stock in various forms. This section describes the case when self-adhesive labels are separated from the liner immediately after printing. The liner is then wound up on an integral liner takeup hub. This is also known as “Self-strip”...
  • Page 38 Turn the printhead lift lever clockwise to Open the side door. raise the printhead. Pull out the handle to collapse the Remove any empty core from the media takeup hub, then remove any liner. supply roll post. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 39 Route the liner around the tear bar and of the takeup hub, then rotate the hub the liner drive roller and back under the counterclockwise a few turns to wind up print mechanism and guide shaft. some of the liner. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 40 This diagram shows the media and liner becomes tight. paths. Adjust the position of the green edge Turn the printhead lift lever counter- guide so the media is guided with a clockwise to engage the printhead. minimum of play. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 41 Chapter 4—Media Load Peel-Off , cont. Press the Feed key to advance the media Close the side door. and adjust the media feed. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 42: External Supply (Fan-Fold)

    Chapter 4—Media Load External Supply (Fan-fold) The EasyCoder PF2i can print on labels, tickets, tags, and continuous stock in various forms. This section describes the case when the media supply is placed behind the printer, usually in the form of fan-folded tickets or tags.

  • Page 43: Thermal Transfer Printing

    Thermal Transfer Printing This chapter explains how to load the printer with ribbon for thermal transfer printing when the printer is fi tted with an optional transfer ribbon mechanism. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 44: Ribbon Load

    The EasyCoder PF2i can use transfer ribbon rolls wound with the ink- coated side facing either outward or inward. Illustrations in this manual show the ink-coated side facing inward.
  • Page 45 Turn the printhead lift lever clockwise to Open the side door. raise the printhead. In case of ribbon reload, remove any Unpack a roll of original Intermec used ribbon and empty ribbon core. thermal transfer ribbon. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 46 Without releasing the ribbon, turn the Slide the empty cardboard core onto printhead lift lever counterclockwise the ribbon rewind hub so the ribbon to engage the printhead and lock the is wound up when the hub rotates ribbon. counterclockwise. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 47 Turn the printhead lift knob counter- clockwise to engage the printhead. Close the side door. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 48 Chapter 5—Thermal Transfer Printing Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 49: Setting Up The Printer

    It covers the following topics: • Description • Default setup • Setup Parameters in regard of communication, feed adjust, media, and print defi nes. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 50: Description

    Setup Mode • Press the <Setup> key on the printer’s built-in keyboard to enter the Setup Mode, or • select the Setup option in Intermec Shell to enter the Setup Mode, or • execute the Intermec Fingerprint instruction to enter the...

  • Page 51: Default Setup

    Transmit buffer 1024 bytes Feedadjust: Startadjust Stopadjust Media: X-start Width Length 1200 Media type Label (w Gaps) Paper type Direct Thermal Label constant Label factor Contrast ±0% Print Defi nes: Print speed 100 mm/sec. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 52: Reading The Current Setup

    Setup Mode. You can list the printer’s current setup values by printing test label “Setup Info” in the Setup Mode or by using Intermec Shell. The current setup values can be sent to the host via the standard serial communication channel using a SETUP WRITE "uart1:"...

  • Page 53: Setup Parameters

    The baud rate is the transmission speed in bits per second. There are 10 options: • • • 1200 • 2400 • 4800 • 9600 (default) • 19200 • 38400 • 57600 • 115200 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 54: Character Length

    The character length specifi es the number of bits that will defi ne a character. Eight bits are recommended, because that option allows more special characters and characters specifi c for foreign languages to be used. Refer to the Intermec Fingerprint v8.xx, Programmer’s Reference Manual for more information. • 7 Characters ASCII 000 to 127 decimal •...

  • Page 55: New Line

    The receive buffer stores the input data before processing. Default size is 1024 bytes. Transmit Buff er The transmit buffer stores the output data to be transmitted before trans- mission. Default size is 1024 bytes. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 56: Feedadjust

    • A negative stop adjustment means that the normal media feed after the printing is completed will be decreased by the specifi ed value. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 57: Recommended Feed Adjustments

    Tear-Off (Straight-through) Start adjust: -100 dots (12.5 mm/0.49 in.) Stop adjust: 0 dots (0 mm/0 in.) Peel-Off (Self-strip) Start adjust: -56 dots (7 mm/0.28 in.) Stop adjust: -44 dots (5.5 mm/0.22 in.) Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 58: Media

    Note: The temporary memory has other functions that also require some memory space. To obtain a longer print area, the memory can be increased by fi tting a larger SDRAM SIMM on the printer’s CPU board as described in the Service Manual. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 59 Intermec Fingerprint v8.xx, Programmer’s Reference Manual. Print Window 4 mm (0.16 in) max. 56.0 mm (2.2 in) PRINT PRINT Length WINDOW WINDOW Origin Dot-line on printhead X-start Width (1-448) FEED Dot #447 Dot #0 DIRECTION 25-60 mm (1-2.36 in) Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 60: Media Type

    • Error 1031 “Next label not found” indicates that the last ordered label or ticket was successfully printed, but no more labels/tickets can be printed because of an empty media stock. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 61: Paper Type

    Labels, tickets, tags, strip, and ribbons for various types of application are available from Intermec. For the best printout quality and maximum life of the printhead, use Intermec supplies and set up the printer according to the recommendations from Intermec, see Appendix D.
  • Page 62 • Low Diameter (range 25 to 80 mm) When adjusting the image darkness for non-Intermec media and transfer ribbons, set the Ribbon Factor to the recommended value for the type of thermal transfer ribbon. Set the Ribbon Constant to the value listed below and decrease or increase it for lighter or darker images respectively until you are satisfi...

  • Page 63: Contrast

    Feedadjust parameter (same as the Intermec Fingerprint statement TESTFEED). Four values used for troubleshooting the LSS are displayed (read-only information).
  • Page 64 Chapter 6—Setting Up the Printer Test Labels 706 ohms/8 dots Diamonds Chess Bar Codes #1 Bar Codes #2 Setup Info (1/2) Setup Info (2/2) Hardware Info Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 65: Print Speed

    • If a negative start adjust is used, do not use a print speed >125 mm/sec. • Narrow media width may require further restrictions on print speed. • Avoid placing text and ladder-style bar codes close to the front edge of labels. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 66: Lts (Label Taken Sensor)

    Then press <Enter> to stop and exit. LTS Value Press <Enter>. You can enter a new value in the range indicated in the LTS Adjust menu (see above). Min/max values are in the range 0 to 10. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 67: Setup Mode

    This chapter describes how to enter the setup mode at installation, explains how to navigate in the setup mode, and provides overviews over which parameters and messages are available for the standard printer and with various interface boards. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 68: Entering The Setup Mode At Installation

    <Enter> key. • Press the <Setup> key (this facility can be used anywhere within Intermec Shell and also outside Intermec Shell provided there is no application program running that disables the <Setup> key). • Set up the printer as described in this chapter.

  • Page 69: Navigating In Setup Mode

    Clear displayed values. Acknowledge and move to next menu or perform testfeeds in the Testfeed menu, or print test labels in the Test label menu. Exit the Setup Mode. Can be used anywhere in Setup Mode. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 70 Starting point SETUP: SETUP: SER-COM, UART2 SER-COM, UART1 Option SETUP: SETUP: SER-COM, UART3 PRINT DEFS Option SETUP: SETUP: NET-COM, NET1 MEDIA Option SETUP: SETUP: NETWORK FEEDADJ Option Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 71: Setup Mode Overviews

    DATA TO HOST: DATA FROM HOST: ENABLE ENABLE Scroll forward Scroll forward Scroll back Scroll back Legend: Dotted boxes and lines indicate options. Thick boxes indicates default options. Values inside brackets indicate default settings. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 72 Chapter 7—Setup Mode Setup Mode; Feed Adjust (Intermec Fingerprint v8.10) Continued from the Continued on SETUP: previous page the next page FEEDADJ FEEDADJ: FEEDADJ: STARTADJ STOPADJ: STARTADJ: STOPADJ: [0]: [0]: Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 73 CONTRAST: form a testfeed. DIRECT THERMAL: DIRECT THERMAL: CONTRAST: Values are read-only. LABEL CONSTANT LABEL FACTOR CONTRAST: +10% CONTRAST: -10% CONTRAST: LABEL CONSTANT LABEL FACTOR: CONTRAST: [85]: [40]: CONTRAST: CONTRAST: Scroll forward Scroll back Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 74 Only displayed if an optional LTS (Label Taken Sensor) is installed in the printer. LTS: LTS: LTS: LTS ADJUST LTS TEST LTS VALUE REMOVE LABEL AND REMOVE LABEL LTS VALUE: PRESS ENTER ENTER TO STOP [10]: SENSITIVITY 10 OUT OF 9-10 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 75 SER-COM, UART2: SER-COM, UART2: SER-COM, UART2: TRANS BUF CONNECTED HW PROTOCOL ADDR. TRANS BUF: CONNECTED HW: PROTOCOL ADDR. [1024]: RS232 [1]: Only displayed in case of Read-only RS485 on "uart2:". Enter printer’s protocol address (0–31). Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 76 NEW LINE: XON/XOFF: XON/XOFF: DATA TO HOST DATA FROM HOST DATA TO HOST: DATA FROM HOST: DISABLE DISABLE DATA TO HOST: DATA FROM HOST: ENABLE ENABLE SER-COM, UART3: CONNECTED HW CONNECTED HW: RS232 Read-only Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 77 IP ADDRESS: NETMASK: DEFAULT ROUTER: NAME SERVER: CR/LF BAUDRATE; DHCP+BOOTP 192.168.1.79 255.255.255.0 192.168.1.1 192.168.1.7 PARITY: BAUDRATE; MANUAL PARITY: Read-only if DCHP DHCP PARITY: and/or BOOTP BOOTP is selected. NETWORK: MAC ADDRESS MAC ADDRESS: 00104017b80e Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 78 Chapter 7—Setup Mode Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 79: Intermec Shell Startup Program

    Intermec Shell Startup Program This chapter describes the Intermec Shell startup program and covers the following topics: • Introduction • Starting with Intermec Shell • Intermec Shell Overview • Line Analyzer Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 80: Introduction

    • LINE_AXP.PRG (line analyzer program) • Other application programs in the printer’s memory. A prerequisite for a program to appear as an option in Intermec Shell is that the program is provided with the extension “.PRG” and is stored in the root of the directory "/c" or "card1:". However, some original Intermec utility programs are excluded as long as they remain stored in "/rom":...
  • Page 81 fi le before you switch on the printer, or if there is a startup fi le stored in the printer’s permanent memory (device "/c"), this startup fi le will be used instead of Intermec Shell (see Chapter 3, “Startup Files”).

  • Page 82: Starting With Intermec Shell

    Intermec Shell will be opened. If you use the same application all the time, you will only need to switch on the power, once the application has been selected.
  • Page 83 Chapter 8—Intermec Shell Startup Program Selecting an Application In Intermec Shell, the menus present the options in infi nite loops, To see all menus and options, refer to the overview in this chapter. The Select application lets you choose an application program that resides in the printer’s memory:...
  • Page 84 fi rmware in several printers simply by moving the card from printer to printer. Just insert the card, switch on the power, and wait from the prompts to appear in the printer’s display window. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 85 Intermec distributor. Reboot Corresponds to cycling the power to the printer. To exit Intermec Shell without having selected any application, select Reboot. Then wait for the 5 seconds countdown to fi nish, and the last selected application will be opened.

  • Page 86: Intermec Shell Overview

    DEFAULT SETUP YES=ENTER/NO=ESC PERFORMED UPDATE: TRANSFER FILE SHELL COMPACT FLASH? USING ZMODEM SOFTWARE UPDATE TRANSFER COMPLETED SHELL UPDATE: TRANSFER FILE REBOOT FIRMWARE? USING ZMODEM Printer rebooted Restarts the printer (same as power off/on) automatically. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 87: Line Analyzer

    Line Analyzer The Line Analyzer (LINE_AXP.PRG) is a program written in the Intermec Fingerprint programming language and is intended to help solving possible communication problems. As the name implies, the Line Analyzer captures all incoming characters on a specifi ed communication channel and prints them on one or more labels.
  • Page 88 Chapter 8—Intermec Shell Startup Program If the printer is not fi tted with the specifi ed port, an error message appears in the display and you can select another port: Line Analyzer Error:56 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 89: 9 Options

    Options This chapter describes the options available for the EasyCoder PF2i printer. The options can be factory installed, fi eld-installed by an authorized service technician, or in some cases installed by the operator. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 90: Introduction

    Chapter 9—Options Introduction The EasyCoder PF2i provides a high degree of fl exibility because it has a modular design. By adding options to the basic printer, the EasyCoder PF2i can be adapted for a variety of applications. Most options can...

  • Page 91: Transfer Mechanism

    Side Doors The EasyCoder PF2i comes with either a short side door, which only covers the print mechanism or with a long side door, which encloses the entire media compartment. The long side door has a slot for external media supply.

  • Page 92: Label Taken Sensor

    fi rmware to detect if the latest printed label, ticket, tag, etc. has been removed before printing another copy. The LTS can be enabled or disabled by means of the instructions LTS& ON and LTS& OFF respectively in Intermec Fingerprint and the Intermec Direct Protocol. Real Time Clock...

  • Page 93: Troubleshooting

    Troubleshooting This chapter lists various possible cases of inferior printout quality, describes possible causes, and sug- gests remedies. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 94: Troubleshooting List

    Change parameter Chapter 6 high Printhead pressure Adjust Chapter 12 too high ☎ Call Service Faulty energy Replace CPU board control Dark lines along Foreign objects on Clean printhead Chapter 11 media path printhead Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 95 Check/change Chapter 12 Dirty sensors Clean media guides Chapter 11 ☎ Call Service Faulty sensors Replace Compressed text or Too high print Lower print speed Chapter 6 bar code speed for large media roll Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 96 Chapter 10—Troubleshooting Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 97: 11 Maintenance

    Regular maintenance is important for the printout quality and for the life of the printhead. The chapter covers the following topics: • Printhead cleaning • External cleaning • Cleaning the media guides • Printhead replacement. • Media jams Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 98: Printhead Cleaning

    Isopropyl alcohol [(CH CHOH; CAS 67-63-0] is a highly fl ammable, moderately toxic, and mildly irritating sub- stance. Turn the printhead lift lever clockwise to Open the side door. raise the printhead. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 99 Read the Remove any media (and ribbon). warning text. Insert most of the cleaning card under the printhead (1). Engage the printhead Pull out the cleaning card (1) and raise (2). the printhead (2). Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 100 fl uid to dissolve the residue. (2). Pull out the cleaning card. If necessary, repeat the process with a fresh cleaning Allow the cleaned parts to dry before card. loading any media (and ribbon). Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 101: External Cleaning

    Never use any sharp tools for removing Never spray the printer. Protect it from stuck labels. The printhead and rollers water when cleaning the premises. are delicate. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 102: Cleaning The Media Guides

    Tilt the upper guide upwards and clean from the lower guide. Take care not to the areas marked with gray. After damage the cable. cleaning, re-assemble in reverse order. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 103: Printhead Replacement

    While replacing the printhead, the power must be off. The fi rmware will not detect the new printhead resistance until the printer has been restarted. Turn the printhead lift lever clockwise to Open the side door. raise the printhead. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 104 Note the snap-lock on the inner arrows and pull out the printhead as far connector. Pull at the connectors—not as the cables allow. at the cables! Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 105 Turn the printhead lift lever counter- Load a new supply of media (and clockwise so the magnet engages the ribbon), as described earlier in this printhead bracket. manual. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 106: Media Jams

    CHOH; CAS 67-63-0] is a highly fl ammable, moderately toxic, and mildly irritating sub- stance. • Reload the media as descibed in Chapter 4. • Switch on the power. • Readjust the media feed by pressing the <Feed> key. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 107: 12 Adjustments

    This chapter describes how the operator can adjust the printer. The chapter covers the following topics: • Narrow media adjustment • Label stop sensor position adjustment • Printhead pressure adjustment • Ribbon break shaft adjustment • Quick-Load guides installation Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 108: Narrow Media Adjustment

    If the arm is hard to move, lift the printhead and pull the printhead bracket free from the magnet in the arm. • After having centered the arm, lock it by tightening the screw. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 109 Chapter 12—Adjustments Screw Pressure arm Center of media Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 110: Label Stop Sensor Position Adjustment

    Four clicks out 16 mm .639 inches Five clicks out 20 mm .787 inches One diode + One sensor Upper part of LSS One diode + One sensor Lower part of LSS Print mechanism Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 111: Printhead Pressure

    To return to the factory setting, tighten the screw (+) as far as it goes and then loosen it (-) six full turns. Do not use a higher printhead pressure than necessary, because it may increase the wear of the printhead and shorten its life. Adjustment screw Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 112: Ribbon Break Shaft (Option)

    (bw) to move the outer end of the break shaft backward. Before readjusting the break shaft, make sure that there is no other cause for the wrinkling of the ribbon. (See Chap- ter 10, “Troubleshooting.”) Adjustment Screw Ribbon Break Shaft Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 113: Installing The Quick-Load Guides

    Lift up the upper media guide and pull shaft as illustrated, making sure that out the green edge guide (save it for the notches fi t the rail at the rear of the later use). lower media guide. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 114 Chapter 12—Adjustments Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 115: Technical Data

    Technical Data This appendix lists the technical data for the printer. Please note that Intermec reserves the right to change without prior notice and that this information does not represent a commitment on the part of Intermec. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 116 Firmware Operating System Intermec Fingerprint v8.10 Incl. Direct Protocol Smooth Fonts TrueDoc and TrueType fonts Built-in scaleable fonts Unicode fonts (std) Built-in bar code symbolo- gies (std) Startup Program (std) Intermec Shell v8.0 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 117 22 keys membrane-switch type Print button Beeper Data Interfaces Serial 1 x RS-232 + 1 x USB Bar Code Wand Connection for Optional 1 + 1 1 for EasyLAN Interface Boards 1 for other board Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 118 /. The max. print length is also restricted by the amount of free SDRAM memory. /. Latin, Greek, and Cyrillic fonts according to Unicode standard are included. /. Depending on model, the printer may be delivered with either a long or a short side door. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 119: Media Specifi Cations

    Media Specifi cations This appendix specifi es the physical measures for vari- ous types of media. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 120: Media Roll Size

    The maximum recommended media thickness is 175µm (0.007 inches). Thicker media may be used, but print quality will be reduced. The stiffness is also important and must be balanced against thickness to maintain print quality. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 121 Media rolls to be loaded inside the printer should be wound with the printable side facing outwards. The media supply must not be exposed to dust, sand, grit, etc. Any hard particles, however small, can damage the printhead. Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 122: Media

    ⇐ a ⇒ Media Width Maximum: 60.0 mm (2.36 inches) Minimum (standard): 25.0 mm (1.00 inches) Minimum (Quick-Load): 40.0 mm (1.57 inches) Media Type Setup • Fix length strip • Var length strip NON-ADHESIVE STRIP Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 123: Self-Adhesive Strip

    ⇐ c ⇒ Media Width (excluding liner) Maximum: 58.4 mm (2.30 inches) Minimum: 23.8 mm (0.94 inches) Media Type Setup • Fix length strip • Var length strip SELF-ADHESIVE STRIP Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 124: Self-Adhesive Labels

    (e) to be larger than 7 mm (0.28 inches), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short labels will work, but it is up to the user to test this in his unique application.
  • Page 125 Appendix B—Media Specifi cations SELF-ADHESIVE LABELS FEED DIRECTION Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 126: Tickets With Gap

    (e) to be larger than 7 mm (0.28 inches), that batch printing is used, and that no pull back of the media is performed. Intermec does not guarantee that such short tickets will work, but it is up to the user to test this in his unique application.
  • Page 127 Appendix B—Media Specifi cations TICKETS & TAGS FEED DIRECTION Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 128: Tickets With Black Mark

    Media Type Setup • Ticket (w mark) Note: Preprint that may interfere with the detection of the black mark should be avoided. However, the Intermec Fingerprint statement LBLCOND allows the sensor to be temporarily disabled during a specifi ed amount of media feed in order to avoid unintentional detection, see Intermec Fingerprint manuals.
  • Page 129 Appendix B—Media Specifi cations TICKETS WITH MARKS FEED DIRECTION Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 130 Appendix B—Media Specifi cations Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 131: C Interfaces

    Interfaces This appendix describes the interface connectors found on the printer’s rear plate. It covers the follow- ing topics: • RS-232 interface • USB interface • Bar code wand interface • Optional interface boards Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 132: Rs-232 Interface

    Request to send RS-232 ("uart1:") – Not used /. The external +5V is limited to 500 mA and is automatically switched off at overload. Interface Cable Computer end: Depends on computer model Printer end: DB-9pin plug Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 133: Usb Interface

    USB port on the host, either directly or via a hub. Other devices, like a keyboard and a mouse, can be connected to the same hub. If you need to connect more than one Intermec USB printer to a host, you should use different USB ports.

  • Page 134: Bar Code Wand Interface

    For more demanding applications or for reading bar codes other than Code 128, choose a regular bar code scanner from Intermec’s wide prod- uct range and connect it to a serial port.

  • Page 135: Optional Interfaces

    "uart2:" RS-232, RS-422 non isolated, RS-422 Isolated, or RS-485 Serial/Industrial Interface Board Industrial interface 8 digital In ports 8 digital Out ports 4 relay ports "uart2:" RS-232, RS-422 non isolated, RS-422 Isolated, or RS-485 Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 136 Appendix C—Interfaces IEEE 1284 Parallel Interface Board "centronics:" EasyLAN Ethernet Interface "net1:" EasyLAN Wireless Interface "net1:" Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 137: Intermec Supplies

    Intermec Supplies This appendix describes the supplies offered by Intermec for use with this printer, that is, direct ther- mal media, thermal transfer ribbons, and receiving face materials for thermal transfer printing Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 138: Direct Thermal Media

    Appendix D—Intermec Supplies Direct Thermal Media Intermec offers two quality grades of direct thermal media for the Easy- Coder printers: Premium Quality Top-coated media with high demands on printout quality and resistance against moisture, plasticisers, and vegetable oils. Examples: Europe...

  • Page 139: Thermal Transfer Media

    Appendix D—Intermec Supplies Thermal Transfer Media Intermec offers stock labels for thermal transfer printing in a wide range of quality grades. Uncoated Papers Economical high-volume printing. To be used with GP/TMX 1500 rib- bons. Examples: Europe North America TTR Uncoated –...

  • Page 140: Transfer Ribbons

    Appendix D—Intermec Supplies Transfer Ribbons Intermec offer three ranges of thermal transfer ribbons optimized for dif- ferent purposes: • General Purpose (GP/TMX 1500) transfer ribbons allow high speed printing and give a good printout, but are somewhat sensitive to smearing. They may be the best choice for uncoated and coated papers.

  • Page 141: Bar Code Directions

    Chapter 6). The illustration below shows how the two type of bar code directions relate to the media feed direction. Bar Code Directions Picket Fence Dir 1 & 3 Dir 2 & 4 Ladder Feed Direction Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 142: Recommended Paper Type Settings (Europe)

    If the ambient temperature is lower than +15°C (+59°F), decrease print speed by 50 mm/sec. /. Applies to printing of text, lines, boxes, images, and picket fence bar codes. /. Applies to ladder bar codes. /. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”). Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)

  • Page 143: Recommended Paper Type Settings (North America)

    If the ambient temperature is lower than +15°C (+59°F), decrease print speed by 50 mm/sec. /. Applies to printing of text, lines, boxes, images, and picket fence bar codes. /. Applies to ladder bar codes. /. Requires high printhead pressure (see Chapter 12 “Adjustments, Printhead Pressure”). Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 144 Appendix D—Intermec Supplies Intermec EasyCoder PF2i—User’s Guide (Fingerprint version)
  • Page 146 Intermec Printer AB Idrottsvägen 10, P.O. Box 123 S-431 22 Mölndal, Sweden tel +46 31 869500 fax +46 31 869595 www.intermec.com EasyCoder PF2i—User’s Guide (Fingerprint version) *1-960578-01* *1-960578-01*...

Table of Contents