Restore Default Settings Using The Printer Buttons; Restore Default Settings From The Printer Web Page - Intermec PR2 User Manual

Chapter 3 — Troubleshoot and Maintain the Printer

Restore Default Settings Using the Printer Buttons

Restore Default Settings from the Printer Web Page

30
The easiest way to restore factory default settings to your printer is to
use the Print and Power buttons.
1 Make sure the printer is off.
2 Open the media door.
3 Press and hold the Print button, and then press and release the
Power button to turn on the printer.
The Intermec Ready-to-Work™ indicator starts to blink.
4 Continue to hold the Print button until the Ready-to-Work
indicator turns on and stays on.
During this process, the Connectivity icon and Critical Error icon
may turn on and off.
5 Release the Print button.
6 If you want the printer to print a message, make sure that media is
installed in the printer.
7 Close the media door.
When the process is complete, the printer automatically restarts.
To restore default settings to the printer from the printer web page,
you need to turn on the printer and connect to your Wi-Fi network.
Note: If you are not using a DHCP network and you do not know your
printer IP address, you must configure Wi-Fi settings using Intermec
PrintSet 5.2 or later with a USB connection.
1 On your desktop PC, open a web browser.
2 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
3 Click Printer > Web Shell.
4 When prompted, type your Username and Password. The default
username is admin and the default password is pass.
PR2 and PR3 Mobile Receipt Printer User Manual