Configuring Communications Settings; Configuring Media Settings; Configuring Print Engine Settings (Fingerprint Only); Configuring Web Shell Settings - Intermec PM4i User Manual

PM4i Mid-Range Printer User's Manual

Configuring Communications Settings

Use the communications page to configure serial communications,
the communications interface, and the keyboard layout.
To configure communications settings
1 Click Printer > Communication.
2 Choose the settings you want to change.
3 Click Submit Setup.

Configuring Media Settings

Use the media page to view and change media settings such as
XSTART position, media type, and contrast.
To configure media settings
1 Click Printer > Media.
2 Enter the correct information for the media you are using.
3 Click Submit Setup.

Configuring Print Engine Settings (Fingerprint Only)

Use the print engine page to adjust the media feed direction (start and
stop adjust positions) and print speed. The value of the head
resistance is read-only and is measured by the firmware when the
printer starts up.
To configure print engine settings
1 Click Printer > Print Engine.
2 Enter the correct information for the print engine.
3 Click Submit Setup.

Configuring Web Shell Settings

Use the Web Shell page to view and change test and default settings.
You can also use the Web Shell page to print test labels and change the
command language.
Chapter 3 — Configuring the Printer
65