Chapter 2 — Configuring the PB21 and PB31
Configuring the Printer Settings
Changing Wi-Fi Configuration Settings from PrintSet
Changing Configuration Settings Using the Command Line
42
You can change the printer configuration settings from:
•
the display.
•
the host PC using PrintSet.
•
the host PC using the command line.
•
the printer home page.
•
SmartSystems
TM
For more information about the IPL and Fingerprint menu systems,
see
"IPL and Fingerprint Setup Menus" on page
PrintSet is a printer configuration tool that you can download from
the Intermec website. PrintSet can communicate with your printer
through a serial cable or a network connection. It works on all PCs
running Windows 98 (or later). PrintSet allows you to easily change all
of the setup parameters. It also includes setup wizards to guide you
through some common configuration tasks.
You can change configuration parameters by sending commands
directly to the printer using a communications program like
HyperTerminal and a serial or network connection.
If your printer is running Fingerprint, use the SETUP command,
followed by the node, subnode, and parameters setting. Fingerprint
automatically sends feedback to the communications program as you
type. If your printer is running IPL, you need to change the
HyperTerminal settings to see what you are typing.
To see IPL commands as you type
1 From the HyperTerminal menu, select File > Properties > the
Settings tab.
2 Click the ASCII Setup button.
3 Select Echo typed characters locally.
4 Click OK twice.
.
PB21 and PB31 Mobile Receipt Printer User Guide
79.