PF2i and PF4i Mid-Range Printer User's Manual
Label Length (d)
Measurement
Value
Maximum
Dependent on SDRAM size
Minimum
8.0 mm (0.32 in)
Note: Under ideal circumstances, a minimum label length of 4 mm
(0.16 in) could be used. It requires the sum of the label length (d) and
the label gap (e) to be larger than 7 mm (0.28 in), that batch printing is
used, and that no pull back of the media is performed. Intermec does
not guarantee that such short labels will work, but it is up to users to
test this in their unique application.
Label Gap (e)
Measurement
Value
Maximum
21.3 mm (0.83 in)
Recommended
3.0 mm (0.12 in)
Minimum
1.2 mm (0.05 in)
The Label Stop Sensor (LSS) must be able to detect the extreme front
edges of the labels.
Appendix A — Specifications
137