Printing A Test Label - Intermec PF2i User Manual

Chapter 1 — Using the Printer

Printing a Test Label

36
11 Close the media cover.
12 Set the Paper Type to Thermal Transfer Ribbon (TTR).
a On your printer's keypad, press T to enter the Setup menu.
b If you are using Fingerprint, go to Media > Paper Type >
Transfer.
If you are using IPL, go to Media > Paper Type > TTR.
c Press E.
d Press T to exit the Setup menu.
You can print a test label (perform a testprint) to:
• make sure that your printer is working properly.
• get your printer's setup, hardware, and network information.
• get RFID tag information.
• check print quality and determine which adjustments to make.
PF2i and PF4i Mid-Range Printer User's Manual