Adding Remaining Axis Channels; Axis Channels - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
4
Configuring the Cameras
8.
Figure 4-16
9.
Figure 4-17
94
Click Save. A message Do you want to add the remaining analog channels to the
system? is displayed at the bottom of the screen as shown below.

Adding Remaining Axis Channels

Click Yes to add the remaining channels. The list of channels associated with the camera
is added in the Camera list as shown below.

AXIS Channels

MAXPRO NVR 3.1 Operator's Guide