Honeywell MAXPRO Operator's Manual page 32

M A X P R O N V R W I Z A R D
1
Note:
32
Field Description
DI SCOVERY SETTI NGS
Choose Camera Enables you to choose your camera network from the drop-
Network down list.
Click the refresh icon
Auto IP Assigns a valid address to cameras with Automatic Private IP
Assignment Addressing (APIPA).
Note:
want to assign an IP address in your computer network range to
the cameras.
Range for IP Assignment: The MAXPRO NVR system
automatically detects all the cameras in this range on the
network.
From, To: Type the IP range.
Filter Discovered Enables you to filter the discovered cameras based on the
Cameras camera model and IP range.
• Filter By Camera Type: Select this check box and then
select a camera model from the drop-down list by clicking
the respective check boxes.
• Filter By IP Range: Select this check box and then type the
IP range in From and To.
• Select the required language from the drop-down list. The supported languages are
Arabic, Czechoslovakian, Dutch, French, German, Russian, Italian, Polish, Portuguese,
Spanish, and English. The default language is English (US English).
• Select the Launch Wizard on Windows startup check box to launch the wizard
automatically each time you start Windows.
Click RESET to restore the default settings for each of the fields listed in the
above table.
to refresh the drop-down list.
Use this option only if you do not have a DHCP server and
MAXPRO NVR 3.1 Operator's Guide