Honeywell MAXPRO Operator's Manual page 102

C O N F I G U R I N G M A X P R O N V R
4
Configuring the Cameras
5.
Note:
6.
7.
Caution:
8.
Note:
102
Under Live Quality Settings
• Select the Video Format (NTSC or PAL).
• The Compression Format is defaulted to a fixed value based on the camera model.
• By default the highest supported Resolution (720 X 480) is selected with maximum
frame rate supported by the card.
• Select the FPS for a camera. FPS refers to the number of pictures displayed in
exactly one second. FPS is a measure of how much information is used to store and
display motion video. The term applies to digital video. Each frame is a still image;
displaying frames in quick succession creates the illusion of motion.
• Type the Hardware ID, if the analog camera type is a PTZ camera. The hardware ID
is based on the PTZ Protocol.
Based on the model, Analog Capture card supports only 480 frames @ CIF. By
default all the 16 cameras will be added. You can add/remove the number of
cameras based on the range of FPS and supported resolution.
• Select the PTZ Sensitivity for a PTZ camera. Available PTZ options are: Low,
Normal, High and Maximum. For advanced PTZ settings see
Settings section.
• The Compression is defaulted to "Medium". You can select a new Compression
ratio as applicable.
Under Record Quality Settings
• Select the FPS for Continuous recording.
• Select the FPS for Event based recording.
By default GOP is equivalent to FPS (1 I-frame per second).
Under Recording Deletion Settings
• Select the Event Recording clip deletion duration.
• Select the Continuous Recording clip deletion duration.
For Recording Deletion Settings, please exercise caution with Keep
Forever clip deletion duration setting. Recordings with Keep Forever are
stored permanently and are not deleted/overwritten even if the disk
becomes full. They can be deleted only manually from the Search tab.
Click Video Display Settings. The Color Correction dialog box appears.
The Video Display Settings feature is available only on the desktop local client
on the NVR Hybrid Server machine.
Advanced PTZ
MAXPRO NVR 3.1 Operator's Guide