Pausing The Video Rendering - Honeywell MAXPRO Operator's Manual

Pausing the Video Rendering

MAXPRO NVR 3.1 Operator's Guide
3. Select the Renderer Option (Default/No Video Display) for video rendering.
4. Select the Mange CPU Load (Throttle Frame Rate) check box if you want to throttle the
frame rate if the CPU usage reaches 90 per cent.
5. Select the Show Time Stamp For Live check box if you want the camera name and time
to be displayed on the live video.
6. Select the Deinterlace Selected Panel check box if you want to deinterlace the selected
panel.
7. Select the check box beside Set FPS Limit For Unselected Panel.
8. Select the FPS Limit. The default frame rate is 5 fps and is the recommended setting for
unselected panels.
9. Click Apply.
10. Click OK to close the dialog box.
You can pause the video rendering to momentarily stop the rendering of video when a tab that
does not display video is selected (for example, when the Report tab is selected, the video
rendering can be paused to improve the application performance). The rendering of video
starts again when you select a different tab in the user interface.
To select the tab which pauses video rendering
1. Click the Preferences option in the User menu,
appears. By default, the General Settings tab is selected.
2. For Pause Video Rendering, select the check box next to the tab names that you want to
select.
Figure 3-13 Settings for pausing the Video Rendering
3. Click Apply.
4. Click OK to close the dialog box.
L O G G I N G O N A N D F A M I L I A R I Z A T I O N
Setting Preferences
. The Preferences dialog box
57