Configuring 360/180 Cameras; Configuring The Panomorph Settings For The Cameras With Immervision Support; Panomorph Settings - Honeywell MAXPRO Operator's Manual

Configuring 360/180 Cameras

Configuring the Panomorph Settings for the Cameras with
Immervision Support
MAXPRO NVR 3.1 Operator's Guide
ImmerVision's Panomorph lens enables 360 degree Field of View (FOV). This lens is
compatible with industry standard analog and IP cameras.
By using the Panomorph lens with your IP/ Analog camera, you can:
• View live, record and playback the complete 360x180 FOV.
• Eliminate blind spots in the FOV.
• Increase the video surveillance coverage.
• Detect, track and analyze throughout the entire area.
• Playback the recorded video with digital watermark for evidence purposes.
Caution:
Only Immervision certified camera models have this feature enabled.
Before configuring this feature, please check whether your camera has
the Panomorph lens.
To configure Panomorph settings
1. On the Camera page, under Panomorph Settings
Figure 4-13

Panomorph Settings

• Select the Enable Panomorph check box to enable the Panomorph feature.
• Select the Mounting Position. You have three options to choose from: Wall,
Ceiling, and Ground.
• Select the Default Mode for the camera. The available modes are PTZ Mode, Quad
Mode, and Perimeter Mode.
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
89